11B-607.4.2.1 Back wall....
Search Results "Back Check"
-
11B-607.4.2.1 Back wall
-
7.3(1)
(1) In new construction, accessible check-out aisles shall be provided in conformance with the table below: Total Check-out Aisles of Each Design Minimum Number...
-
M302.3.3 Head and Back Support
Where the diagnostic equipment is used in a reclined position, head and back support shall be provided and shall comply with M305.5....
-
A7.3 Check-out Aisles
Section 7.2 refers to counters without aisles; section 7.3 concerns check-out aisles....
-
§ 36.302(d) Check-out aisles.
(d) Check-out aisles....
-
III-4.2400 Check-out aisles
III−4.2400 Check-out aisles....
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
216.11 Check-Out Aisles
216.11 Check-Out Aisles....
-
11B-607.4.2.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
11B-607.4.2.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
F216.11 Check-Out Aisles
Where more than one check-out aisle is provided, check-out aisles complying with 904.3 shall be identified by the International Symbol of Accessibility complying with 703.7.2.1....
-
216.11 Check-Out Aisles
Where more than one check-out aisle is provided, check-out aisles complying with 904.3 shall be identified by the International Symbol of Accessibility complying with 703.7.2.1....
-
Sec.36.302(d) Check-out aisles
(d) Check-out aisles....
-
Check-Out Areas [8.3]
Check-Out Areas [8.3] Check-out counters at accessible lanes are held to a maximum surface height of 36 inches....
-
11B-216.11 Check-out aisles
check-out aisle identification...
-
11B-216.11 Check-out aisles
check-out aisle identification...
-
11B-216.11 Check-out aisles
check-out aisle identification...
-
M302.3.3 Head and Back Support (Section-by-Section Analysis)
In the MDE NPRM the Access Board proposed to place the requirements for head and back support for diagnostic equipment used by patients in the seated position in M302....
-
4.4.3 Backrest and Armrest
The structural strength of backs, armrests, and mounting devices shall comply with section 903.6 of the ABAAS, which states: “Allowable stresses shall not be exceeded for materials used...
-
904 Check-Out Aisles and Sales and Service Counters
904 Check-Out Aisles and Sales and Service Counters...
-
Locker Rooms
Locker Rooms Recommendations: Benches of the required size (24 inches deep and at least 48 inches long) can be integrated with lockers so that back support is provided from a wall....
-
Queues and Waiting Lines: ADA Standard Section 227.5
Section 227.5 covers scoping requirements in the current ADA Standards for queues and waiting lines.
-
Counter Surface Height
Specifications are provided for the counter surface height of check-out aisles, including the height of counter edge protection, which is limited to 2 inches above the counter surface (904.3.2...