...are all elevator jambs provided with signs placed on both sides designating the floor with 2" minimum height raised letters and Braille characters centered at 60" above the finish floor...
Search Results "Raised Key"
-
Jamb Signage
-
11B-411.2.1.4.1.2 Identification
Buttons shall be identified by raised characters and symbols, white on a black background, complying with Section 11B-703.2 and Braille complying with Section 11B-703.3....
-
5e.
Are signs mounted on both sides of the elevator hoistway door opening that designate the floor with 2-inch minimum-height raised letters and Braille characters centered at 60 inches above...
-
11B-411.2.1.4.1.2 Identification
Buttons shall be identified by raised characters and symbols, white on a black background, complying with Section 11B-703.2 and Braille complying with Section 11B-703.3....
-
11B-411.2.1.4.1.2 Identification
Buttons shall be identified by raised characters and symbols, white on a black background, complying with Section 11B-703.2 and Braille complying with Section 11B-703.3....
-
Talking three-dimensional models for way-finding and orientation
Talking three-dimensional models for way-finding and orientation Touchable models provide more spatially accurate information than the simple raised line map....
-
§ 38.83(b)(2)(i) Requirements
Where provided, each control for deploying, lowering, raising, and stowing the lift and lowering the roll-off barrier shall be of a momentary contact type requiring continuous manual pressure...
-
§ 38.23(b)(2)(i) Requirements
Where provided, each control for deploying, lowering, raising, and stowing the lift and lowering the roll-off barrier shall be of a momentary contact type requiring continuous manual pressure...
-
§ 38.159(b)(2)(i) Requirements
Where provided, each control for deploying, lowering, raising, and stowing the lift and lowering the roll-off barrier shall be of a momentary contact type requiring continuous manual pressure...
-
§382.151(c)(2)
contractors, and Web sites must provide information equivalent to that required by paragraph (c)(1) of this section to passengers with a disability using those services who complain or raise...
-
H5
If there is a raised threshold, is it no higher than 3/4 inch at the door and beveled on both sides?...
-
12188(b)(1)(B)(ii)
(ii) any person or group of persons has been discriminated against under this subchapter and such discrimination raises an issue of general public importance, the Attorney General may commence...
-
11B-810.6 Rail station signs
Emerging technologies such as an audible sign systems using infrared transmitters and receivers may provide greater accessibility in the transit environment than traditional Braille and raised...
-
11B-703.4.1 Height above finish floor or ground
surface, measured from the baseline of the lowest Braille cells and 60 inches (1524 mm) maximum above the finish floor or ground surface, measured from the baseline of the highest line of raised...
-
11B-703.4.1 Height above finish floor or ground
surface, measured from the baseline of the lowest Braille cells and 60 inches (1524 mm) maximum above the finish floor or ground surface, measured from the baseline of the highest line of raised...
-
11B-810.6 Rail station signs
Emerging technologies such as an audible sign systems using infrared transmitters and receivers may provide greater accessibility in the transit environment than traditional Braille and raised...
-
II. Exterior Routes...
Following are questions to determine whether your facility meets some key requirements of the ADA accessible route requirements....
-
Primary Function Areas [4.1.6(2)]
This rule and the DOJ technical assistance manual for title III provide important information on this requirement, including the definition of key terms....
-
Room Dimensions
For single-user toilet rooms, key considerations include the configuration of water closets and lavatories, clear floor spaces required at fixtures, turning space, the location and swing...
-
§ 38.71(d)
vehicles retrofitted to comply with the “one-car-per-train rule” at §37.93 of this title shall comply with §38.75, §38.77(c), §38.79(a) and §38.83(a) of this part and shall have, in new and key...
-
§ 38.91(d)
Existing vehicles retrofitted to comply with the “one-car-per-train rule” at §37.93 of this title shall comply with §§38.93(e), 38.95(a) and 38.107 of this part and shall have, in new and key...
-
11B-707.3 Operable parts
Unless a clear or correct key is provided, each operable part shall be able to be differentiated by sound or touch, without activation....
-
1009.2.6 Footrests and Armrests
If provided, the armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised (load) position....
-
1009.2.6 Footrests and Armrests
If provided, the armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised (load) position....