(1) Design load. The design load of the lift shall be at least 600 pounds. Working parts, such as cables, pulleys, and shafts, which can be expected to wear, and upon which the lift...
Search Results "Rail System"
Commonly Searched Documents
-
§ 38.125(b)(1) Design load
-
§ 38.95(b)(7) Platform gaps
(7) Platform gaps. Any openings between the lift platform surface and the raised barriers shall not exceed 5/8 inch wide. When the lift is at car floor height with the inner barrier...
-
11B-247.1.2.1 Platform edges
Platform boarding edges shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.1.
-
11B-705.1.2.1 Platform edges
Detectable warning surfaces at platform boarding edges shall be 24 inches (610 mm) wide and shall extend the full length of the public use areas of the platform.
-
11B-810.6.1 Entrances
Where signs identify a station or its entrance, at least one sign at each entrance shall comply with Section 11B-703.2 and shall be placed in uniform locations to the maximum extent...
-
D. Notification – Alerting the Public to an Emergency
Officials must act quickly to alert the public to an impending emergency situation. But many traditional emergency notification methods are not accessible to people with...
-
Visual Alarms
Visual Alarms • Where audible fire alarms or emergency notification is provided, flashing lights are required in public and common use areas, including toilet and bath rooms,...
-
8. Revise § 37.165(b) to read as follows
8. Revise § 37.165(b) to read as follows:
-
§ 37.165 Lift and securement use
* * * * *
-
4.28.3(7)
(7) In general, no place in any room or space required to have a visual signal appliance shall be more than 50 ft (15 m) from the signal (in the horizontal plane). In large rooms and...
-
4.28.3(8)
(8) No place in common corridors or hallways in which visual alarm signalling appliances are required shall be more than 50 ft (15 m) from the signal.
-
4.28.3(6)
(6) The appliance shall be placed 80 in (2030 mm) above the highest floor level within the space or 6 in (152 mm) below the ceiling, whichever is lower.
-
8.2.1 Participants
8.2.1 Participants Forty-nine adult listeners with sensorineural hearing loss participated in this study. They were divided into six groups according the degree and configuration...
-
3.2 Microphone Location
3.2 Microphone Location There are no standards for microphone placement in live performances. The actual location appears to be a pragmatic mix composed of production...
-
5.2 Distributing Receivers
5.2 Distributing Receivers The same individual in the same physical location in a venue should be responsible for both checking in and checking out of the...
-
7. INSTALLATION
While the different ALS and venues will require different depths and ranges of competencies, all require some minimum of information if the system is to be installed correctly....
- Estimote Smart Beacons - welcome to the contextual computing era!
- Harris Communications SafeAwake on Welcome Home
- Estimote Sticker Beacons - Introducing Nearables
- Harris Communications SafeAwake Instructional Video
- ROXIMITY Beacon Demo - iBeacons Demo
- inLOOP Personal inLOOP Assistive Listening System
-
2.2.3 Receivers
2.2.3 Receivers The receivers for FM assistive listening systems are basically FM radios "tuned" to the transmitting frequency....
- Estimote Beacons and Stickers Wireless Sensors for Contextual Awareness
