A clear floor or ground space of 36 inches (915 mm) by 48 inches (1220 mm) shall be located at an end the bench with one side of the space adjoining an accessible route, outdoor recreation...
Search Results "Floor Plan"
Filters
Commonly Searched Documents
-
4.4.4 Clear Floor or Ground Space
-
4.7.4 Surface
The surface of the clear floor or ground spaces required by section 4.0 shall be firm and stable. The type of surface should be appropriate to the setting and level of development....
-
Plan 5A: 13-Foot Wide Accessible Guest Room
Plan 5A: 13-Foot Wide Accessible Guest Room This drawing shows an accessible 13-foot wide guest room with features that comply with the 2010 Standards....
-
4) Where the Standard is silent about changes in level
4) Where the Standard is silent about changes in level, such as 604.3 around a water closet or in a toilet compartment: Since there is no mention of the phrase "changes in level...
-
Accessible - Changes in Level
Accessible - Changes in Level: Changes in level up to 1/4" may be vertical and without edge treatment. Changes in level between 1/4" and 1/2" shall be beveled with a slope no...
-
4.5.4 Surface
The surface of the clear floor or ground space for trash, recycling, and other essential containers shall be firm and stable....
-
4.2.6 Clear Floor or Ground Space
At least 48 inches (1220 mm) by 48 inches (1220 mm) of clear floor or ground space shall be provided on all usable sides of fire rings, grills, fireplaces or woodstoves....
-
Inpro Corporation JointMaster® 925 Fire Barrier System Expansion Joint Systems
Requires the Premium User plan or above. (Login or upgrade your account!) -
AccessRec PathMat Temporary ADA Beach Access Mat
Counties, Cities, Towns, National & State Parks, other government and non-profit organizations officials, as well as any individual willing to increase accessibility to their...
-
CalCasp Training: Access Plan Review
In this course we will start with the basics of plan reading, scoping and how to identify violations of both State and Federal Access requirements on a set of plans....
-
University of Alabama at Birmingham (UAB) ADA Professional Training Certificate Program
ADA 510B: 2010 ADA STANDARD, SELF-EVALUATION AND TRANSITION PLAN This course presents an overview of the 2010 ADA Standards for Accessible Design and of the Department of Justices’ Guidance...
-
1(1)(a) Separate ground floor unit entrances
(a) Separate ground floor unit entrances....
-
Bus Shelters: ADA Standard Section 810.3
Bus shelters shall provide a minimum clear floor or ground space complying with 305 entirely within the shelter....
-
7.4.11.1 Clear Space
Trailhead signs shall be located centered at the back of a 30- by 48-inch (760- by 1,220-millimeter) minimum clear floor or ground space....
-
10.3.1(17)
EXCEPTION: Elevator cars with a clear floor area in which a 60 inch diameter circle can be inscribed may be substituted for the minimum car dimensions of 4.10, Fig. 22....
-
Plan 2B: 13-Foot Wide Accessible Guest Room
Plan 2B: 13-Foot Wide Accessible Guest Room This drawing shows an accessible 13-foot wide guest room with features that comply with the 2010 Standards....
-
Emergency Planning for People with Access and Functional Needs
Each topic is divided into the following sections: Overview—provides general information and context about emergency planning programs, services, resources that were discussed at the...
-
11B-810.3 Bus shelters
Bus shelters shall provide a minimum clear floor or ground space complying with Section 11B-305 entirely within the shelter....
-
4.5.2 Clear Floor or Ground Space
A clear floor or ground space shall be provided for each trash, recycling, and other essential container....
-
Spa
Slip resistant oil finish on wood floors in the spa and bathroom Spa pre-heated with solar panels Thermal mass in the greenhouses to store heat during the day and release...
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
