cherry or mahogany finish and include a black name / number plate Designer lockers include a black laminated base and are available in 5 feet and 6 feet high (add 4" for base) Each compartment...
Search Results "Compartment Depth"
- Salsbury Industries Designer Wood Locker Single Tier 1 Wide
- Salsbury Industries Designer Wood Locker Single Tier 3 Wide
-
11B-213.3.4 Lavatories
Where lavatories are provided, at least ten percent but no fewer than one shall comply with Section 11B-606 and shall not be located in a toilet compartment....
-
Bathtub Seats: ADA Standard Section 610.2
Section 610.2 covers the current ADA Standards for bathtub seats.
-
11B-610.2 Bathtub seats
The depth of a removable in-tub seat shall be 15 inches (381 mm) minimum and 16 inches (406 mm) maximum. The seat shall be capable of secure placement....
-
11B-610.2 Bathtub seats
The depth of a removable in-tub seat shall be 15 inches (381 mm) minimum and 16 inches (406 mm) maximum. The seat shall be capable of secure placement....
-
11B-809.12 Electrical receptacles, controls and switches
When the reach is over a kitchen work surface and base cabinet, the work surface shall be 36 inches (914 mm) maximum above the finish floor and 25 1/2 inches (650 mm) maximum in depth....
-
11B-809.12 Electrical receptacles, controls and switches
When the reach is over a kitchen work surface and base cabinet, the work surface shall be 36 inches (914 mm) maximum above the finish floor and 25 1/2 inches (650 mm) maximum in depth....
-
11B-608.4 Seats
A folding seat shall be provided in roll-in type showers and transfer type shower compartments. Seats shall comply with Section 11B-610. [2010 ADA Standards] 608.4 Seats....
-
5.2.3 Transfer Surface Measurement Recommendation for M301 and M302
5.2.3 Transfer Surface Measurement Recommendation for M301 and M302 Description: The transfer surface size standard has two components: width and depth....
-
5.4.1.2 Transfer and Positioning Support Location for Imaging Equipment
Transfer supports should be provided for imaging equipment with transfer surfaces with depths of less than or equal to 24 inches....
- HEWI Stainless Steel Pull Handles
-
Can maneuvering for a forward approach be provided when there is space at least 60” deep in front of a door?
Space at least 60” deep in front of a door that is unobstructed on approach sides will provide sufficient depth for a forward approach if appropriate strike-side clearance is provided; but...
-
Toilet and Bathing Facilities: ADA Standard Section 806.2.4
In addition, required roll-in shower compartments shall comply with 608.2.2 or 608.2.3....
-
COST OF EQUIPMENT
Increase Configuration #1: Accessible equipment as currently available on the market, standard chair arms and stirrups 19 inch max. height 28 inch width 17 inch depth...
-
2.2.2 Structural Anthropometry (i.e. Body and WhMD Dimensions)
Length/Depth: Clearance Depth for tables, trays, etc....
-
608.4 Seats
A folding or non-folding seat shall be provided in transfer type shower compartments....
-
608.4 Seats
A folding or non-folding seat shall be provided in transfer type shower compartments....
-
11B-608.5.1 Reserved
[2010 ADAS] 608.5.1 Transfer Type Shower Compartments....
-
610.1 General
Seats in bathtubs and shower compartments shall comply with 610....
-
610.1 General
Seats in bathtubs and shower compartments shall comply with 610....
-
608.4 Seats
A folding or non-folding seat shall be provided in transfer type shower compartments....
-
608.2.2.1 Clearance
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
-
11B-213.3.4 Lavatories
Where lavatories are provided, at least ten percent but no fewer than one shall comply with Section 11B-606 and shall not be located in a toilet compartment. ...