The spout shall be located 15 inches (380 mm) minimum from the vertical support and 5 inches (125 mm) maximum from the front edge of the unit, including bumpers....
Search Results "Back Support"
-
602.5 Spout Location
-
602.5 Spout Location
The spout shall be located 15 inches (380 mm) minimum from the vertical support and 5 inches (125 mm) maximum from the front edge of the unit, including bumpers....
- ASI Storage Solutions Phenolic Lockers
-
Alterations to cells. (Section-by-Section Analysis)
Only one commenter expressed support for Option I, and a handful of commenters supported Option III. The comments on each option are discussed below....
-
410.6.2 Text Generation (Section-by-Section Analysis)
This proposed section is new to the 508 Standards and 255 Guidelines and would require that, wherever ICT provides real-time voice communication and includes a keyboard, the ICT must also support...
-
601.1 Scope
The technical requirements in Chapter 6 shall apply to ICT support documentation and services where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements)...
-
Vertical Access
Elevators: Controls; visual and audio signals 11B-407.2 Elevators: Symbols 11B-407.4.7.1 Elevators: Support...
-
Associated Constructed Feature
A constructed element associated with a trail that provides support for trail users, but is not a part of the trail tread. ...
-
Vertical Access
Elevators: Controls; visual and audio signals 11B-407.2 Elevators: Symbols 11B-407.4.7.1 Elevators: Support...
-
610 Seats
Comments were evenly divided in supporting one design over the other....
-
QUESTION: WHAT KINDS OF ANIMALS ARE REGARDED AS SERVICE ANIMALS?
For example, emotional support animals, which provide emotional support, well-being, comfort, or companionship to an individual with disabilities but are not trained to do work or perform...
-
5. Comments on Proposed Rule
The comments generally supported the proposed rule, except for the scoping requirements for units with mobility features and units with communication features....
-
Water closet
This would enable caregivers to stand on either or both sides, as necessary, to provide support and assistance with transfer as well as to help with the partial removal and replacement of...
-
B. Proposed 255 Guidelines
The guidelines define “usable” as providing access to information about how to use a product, and direct that instructions, product information, documentation, and technical support for...
-
Exceptions Considered for Wheelchair Spaces on Raised Platforms
Comments should include information on sources to support the dimensions, where possible....
- SoloRider: Accessible Golf Cart Operational Video
-
Wheelchair Spaces
Persons with disabilities overwhelmingly supported such a change to ensure that people using wheelchair spaces do not have to shift or move out of the way of other pedestrian traffic while...
-
How to Measure Transfer Surface Height
Beds, stretchers, and other types of equipment will have unique features that determine the shapes of their patient support surfaces....
-
Standard Stall
Recommendation: Ceiling-mounted partitions are a good idea because toe clearance is not interrupted by vertical supports [sic] Because floor-mounted toilets commonly project further...
-
3.3.2 Unoccupied Device Length
Second, we measured the unoccupied length of the WhMD while it was in use; thus devices measured with elevated leg supports would be “lengthened.”...
-
5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations
5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations The Committee recommends a two-inch high edge protection on the back of the platform...
-
608.5.2 Standard Roll-In Type Shower Compartments
Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from...
-
608.5.3 Alternate Roll-In Type Shower Compartments
controls, faucets, and shower spray unit shall be located on the side wall adjacent to the seat 27 inches (685 mm) maximum from the side wall behind the seat or shall be located on the back...
-
A4.16.5 Flush Controls
Such designs reduce the chance of injury and imbalance caused by leaning back against the fittings....