At least 25 percent of the railings, guards, or handrails shall be 34 inches (865 mm) maximum above the ground or deck surface....
Search Results "Rapid Rail"
Filters
Commonly Searched Documents
-
1005.2.1 Height
-
§ 37.87(e)
(e) Amtrak and commuter authorities purchasing or leasing used intercity or commuter rail cars that are not readily accessible to and usable by individuals with disabilities shall retain...
-
§ 38.125(a)(1) General
All intercity rail cars, other than level entry cars, required to be accessible by §§38.111 (a) and (e) of this subpart shall provide a level-change mechanism or boarding device (e.g., lift...
-
1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (865 mm) maximum above the ground or deck surface....
-
D. Unfunded Mandates Reform Act
Since the 2016 Non-Rail Vehicle Guidelines are issued pursuant to the ADA, which prohibits discrimination on the basis of disability, an assessment of the rule’s effect on state, local,...
-
M302.2.3 Transfer Sides
Armrests, footrests, and side rails are examples of obstructions....
-
§ 37.91(e)
(e) On any train in which either a single level or bi-level dining car is used to provide food service, a person providing intercity rail service shall provide appropriate aids and services...
-
Category 2 Eligibility
This eligibility remains even if bus systems covering the area served by the rail system have become 100 percent accessible....
-
Wagner Instruments Mark-10 M3 Digital Force Gauge
Programmable set points continuously display. 2000 Hz peak sampling of rapid occurring events. Construction Large backlit 5 digit graphic display....
-
M301.2.3 Transfer Sides
Arm rests, footrests, side rails, and stirrups are examples of obstructions....
-
Lowes Gatehouse Custom Access Ramp System
This modular aluminum ramp substructure is designed to be finished with decking, railing and accessories available at Lowe’s....
-
Detectable Warning Surfaces at Shared Use Path Intersections
boundary between a pedestrian route and a vehicular route where there is a curb ramp or blended transition; and the boundary of passenger boarding platforms at transit stops for buses and rail...
-
1015.2 Where required
On the loading side of station platforms on fixed guideway transit or passenger rail systems. Elevated facility observation station access hatches at detention facilities....
-
12162(a)(4)(A)(ii)
Unless not practicable, a person providing intercity rail transportation shall place an accessible car adjacent to the end of a dining car described in clause (I) through which an individual...
-
Guldmann GH3 Lifting Module
The hoist is used in rail systems which are installed, tested and approved according to Guldmann’s stipulation....
-
DORMA 8000 Series Exit Device
The touchbar, rail assembly and integral parts are constructed of solid steel. Devices are available for labeled and non-labeled openings....
-
Security Bollards [7.4] and Security Devices
Security Bollards [7.4] and Security Devices Bollards and rails used to keep shopping carts on the premises must allow an accessible clear passage (32 inches wide minimum) along at least...
-
3.4.3 Unrestricted Viewing Opportunities
Where there is a drop-off of more than 30 inches (762 mm) a guard railing or barrier that complies with the height and opening requirements of the International Building Code sections 1013.2...
-
§ 37.107(a)
entity which is primarily engaged in the business of transporting people and whose operations affect commerce, which makes a solicitation after February 25, 1992, to purchase or lease a new rail...
-
PUBLIC ENTITY
other instrumentality of a State or States or local government; and (3) The National Railroad Passenger Corporation, and any commuter authority (as defined in section 103(8) of the Rail...
-
PUBLIC ENTITY
other instrumentality of a State or States or local government; and (3) The National Railroad Passenger Corporation, and any commuter authority (as defined in section 103(8) of the Rail...
-
Sargent 8300 Mortise Lock Exit Device
The SARGENT 8300 Series Exit Device is a narrow design, push rail style, mortise lock exit device....
-
Guldmann GH1 Q Lifting Module
The GH1 Q lifting module comes with a quick-release system that makes it very simple to click-on and click-off the lifting module from the rails if it from time to time is necesasry to relocate...
-
BEA Inc. PBJMS Series Jamb Push Plate (Push to Open)
The PBJMS Series is a practical solution to guide rail applications. The narrow body allows for a clean sleek look without the installation of a larger plate or bollard....
