Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (102 mm) minimum and 6¼ inches (159 mm) maximum, and a cross-section...
Search Results "Ramp Landing"
Commonly Searched Documents
-
11B-505.7.2 Non-circular cross sections
-
1.3 Previous Research
were more difficult to detect than steeper ramps....
-
1007.6.3 Two-way communication
Areas of refuge shall be provided with a two-way communication system between the area of refuge and a central control point. If the central control point is not constantly...
-
1003.2.13.5.3 Two-way communication
Areas of refuge shall be provided with a two-way communication system between the area of refuge and a central control point. If the central control point is not constantly attended,...
-
A4.3.11.4 Two-way Communication
It is essential that emergency communication not be dependent on voice communications alone because the safety of people with hearing or speech impairments could be jeopardized. The...
-
E. Level Surface
Are the level surfaces of accessible parking spaces and access aisles free of "built-up" curb ramps so persons who use mobility aids (e.g.: wheelchairs, walkers or crutches) can make convenient...
- seca 676 r Digital Wheelchair Scale with Handrail and Integrated RS232 Interface
-
Portable ramp - step 6 inches or less
[See subsections ...]
-
Problem
Suggestion: Provide a portable ramp with edge protection in an area where the vehicle area and the sidewalk are relatively level....
- seca 684 r Digital Multifunctional Scale with Integrated RS232 Interface
-
EXHIBIT A Required Accessible Elements at QuikTrip Stores
In accordance with the ADA Standards, each ramp shall be at least 36 inches wide with a slope not exceeding 8.33% and a cross slope not exceeding 2%; with level landings at least as wide...
-
§ 38.25(b) Contrast
All step edges, thresholds and the boarding edge of ramps or lift platforms shall have a band of color(s) running the full width of the step or edge which contrasts from the step tread and...
-
Elevated Accessible Routes
Two common methods for providing access to elevated play components are ramps and transfer systems....
-
4.1.7(1)(a) General Rule
application sections 5 through 10 unless it is determined in accordance with the procedures in 4.1.7(2) that compliance with the requirements for accessible routes (exterior and interior), ramps...
-
1.1.5
1.1.5 A maximum design cross slope for accessible exterior pedestrian paving and ramps of 1.5% (1:67 or about 3/16 in. per ft. [15 mm per m]) is recommended....
-
Accessible Routes: ADA Standard Section 1002.2
In load or unload areas and on amusement rides, where compliance with 405.2 is not structurally or operationally feasible, ramp slope shall be permitted to be 1:8 maximum. 2....
-
11B-1002.2 Accessible routes
Exceptions: In load or unload areas and on amusement rides, where compliance with Section 11B-405.2 is not structurally or operationally feasible, ramp slope shall be permitted...
-
Why are detectable warnings no longer required for all curb ramps or at hazardous vehicular areas?
In the last update, the ADA Standards were revised to focus more clearly on facilities located on sites in recognition of separate criteria the Access Board is developing for public...
- PromenAid: The solution for Mobility Promo
- PromenAid Handrail System Review by Jon Eakes Video
- PromenAid Handrail System Advertisment Video
- PromenAid: Handrail Overview
-
5.9.2.2 Standing Supports on Dual Ramped Entry Raised Platforms with Wheelchair Spaces
5.9.2.2 Standing Supports on Dual Ramped Entry Raised Platforms with Wheelchair Spaces....