published by the National Institute of Building Sciences, it is stated that surfaces should be tested with a 4 - meter (12 ft) straightedge in both a longitudinal and transverse direction on parallel...
Search Results "Parallel Approach"
Filters
Commonly Searched Documents
-
Unified Facilities Guide Specifications
-
11B-307.4 Vertical clearance
Where a guy support is used parallel to a circulation path, including but not limited to sidewalks, a guy brace, sidewalk guy or similar device shall be used to prevent an overhanging obstruction...
-
11B-809.10.5.1 Clear floor space
A clear floor space 30 inches (762 mm) minimum by 48 inches (1219 mm) minimum shall be located with the long edge of the clear floor space parallel to the side of the bathtub or bathtub-shower...
-
Question 10
the building free of obstacles that block the clear wall and floor space needed for opening the door (between 18 and 42 inches on the latch side of the door, depending on direction of approach...
-
Entrance
An entrance includes the approach walk, the vertical access leading to the entrance platform, the entrance platform itself, vestibules if provided, the entry door(s) or gate(s), and the...
-
11B-203.9 Employee work areas
employee work areas shall only be required to comply with Sections 11B-206.2.8, 11B-207.1, and 11B-215.3 and shall be designed and constructed so that individuals with disabilities can approach...
-
11B-902.4.1 Clear floor or ground space
A clear floor space complying with Section 11B-305 positioned for forward approach shall be provided....
-
Substitute cells. (Section-by-Section Analysis)
The majority who chose to comment supported an approach that allowed substitute cells to be made accessible within the same facility....
-
Stanley Hardware RP9401 Door Closer
valves, which allow for fine tune adjustments Non-handed All season fluid eliminates the need for seasonal adjustments Includes tri-pack mounting hardware for regular, top-jamb and parallel...
-
Allegion Falcon SC90 Series Surface Mounted Door Control
Specifications Meets ANSI A117.1 ANSI/BHMA A156.4, Grade 3 UL Listed Closer mounts hinge side, top jamb or parallel arm when either the Rw/PA or Hw/PA arm...
-
Question 19
fitting rooms free of obstacles that block the clear wall and floor space needed for opening the door (between 18 and 42 inches on the latch side of the door, depending on direction of approach...
-
Individuals with Hearing Impairments or Deafness
., the sound of approaching traffic or cyclists ringing a bell)....
-
Are spring hinges and gravity hinges considered “closers” in determining the size of maneuvering clearances?
Some approaches require additional maneuvering clearances when a door or gate is equipped with a closer because of the additional force that must be counteracted in proceeding through doors...
-
6. Wheelchairs and Other Power-Driven Mobility Devices
The rule adopts a two-tiered approach to mobility devices, drawing distinctions between wheelchairs and "other power-driven mobility devices."...
-
6. Wheelchairs and Other Power-Driven Mobility Devices
The rule adopts a two-tiered approach to mobility devices, drawing distinctions between wheelchairs and "other power-driven mobility devices."...
-
Mammography Equipment
Accessible Mammography Machine 1.Unit pivots to multiple angles and adjusts in height for seated patients. 2.It is best to position equipment to allow both front and side approaches...
-
Sell-outs of specific price ranges. (Section-by-Section Analysis)
The third approach described at § 35.138(f)(3) would permit a public entity to release unsold accessible seats in a specific price range if all other standard seats in that price range were...
-
Maneuvering Space at Doors
The Department has carefully considered these comments, and has declined to adopt this approach....
-
§8.3 Accessible
alteration of a facility or a portion of a facility other than an individual dwelling unit, means that the facility or portion of the facility when designed, constructed or altered, can be approached...
-
11B-604.8.2.2 Doors
Toilet compartment doors, including door hardware, shall comply with Section 11B-404, except that if the approach is to the latch side of the compartment door, clearance between the door...
-
11B-604.8.2.2 Doors
Toilet compartment doors, including door hardware, shall comply with Section 11B-404, except that if the approach is to the latch side of the compartment door, clearance between the door...
-
1134A.5, Item 1
There shall be a minimum clear floor space 48 inches parallel by 30 inches perpendicular (1219 mm by 762 mm) to the side of a bathtub or bathtub-shower combination to provide for the maneuvering...
-
Pass Through Kitchen
In the final rule, this provision has been revised to more clearly address situations where counters, appliances, or cabinets are opposite a parallel wall....
-
406.6 Diagonal Curb Ramps
Diagonal or corner type curb ramps with returned curbs or other well-defined edges shall have the edges parallel to the direction of pedestrian flow....
