a load of 600 pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26 inches, with a safety factor of at least 3 based on the ultimate strength of the material...
Search Results "Material Cost"
Filters
Commonly Searched Documents
-
§ 38.83(c)(1) Design load
-
Slip Resistance
Compliance with the standards requires specifying surface materials, textures, or finishes that prevent or minimize slipperiness under the conditions likely to be found on the surface....
-
[ADA Title III §36.104] Readily achievable
In determining whether an action is readily achievable factors to be considered include -- 1) The nature and cost of the action needed under this part; 2) The overall financial resources...
-
M301.4.1 Clearance in Base (Section-by-Section Analysis)
explaining the concern about the significant structural support required in the patient bed which makes the under bed clearance impractical and the concern about requiring non-ferrous materials...
-
Rulemaking History
revised the draft guidelines in 2005 and made the revised draft guidelines available for public review to facilitate the gathering of data for a regulatory assessment of the potential costs...
-
13. What if I need an accommodation for the mediation?
arranging accessible locations for mediations, providing sign language interpreters, and arranging other accommodations to ensure full and equal access to the mediation process, at no cost...
-
R202.3 Alterations
The alteration of multiple elements or spaces within a facility may provide a cost-effective opportunity to make the entire facility or a significant portion of the facility accessible....
-
C. Executive Order 13175
Because this final rule does not significantly or uniquely affect the communities of the Indian tribal governments or impose substantial direct compliance costs on them, the funding and...
-
§104.45(a) Housing provided by the recipient
A recipient that provides housing to its nonhandicapped students shall provide comparable, convenient, and accessible housing to handicapped students at the same cost as to others....
-
9.1.4(1)
Factors to be considered include room size, cost, amenities provided, and the number of beds provided....
-
Section 35.151(b) Alterations (Section-by-Section Analysis)
The requirement for an accessible path of travel does not apply, however, to the extent that the cost and scope of alterations to the path of travel is disproportionate to the cost of the...
-
What values are recommended for ground and floor surfaces along an accessible route?
In the Access Board research, the static coefficients of friction for a variety of common indoor and outdoor surfacing materials were measured in place using the NBS-Brungraber Tester with...
-
3.2 Study Limitations and Other Issues
from asphalt roofing material....
-
1008.2.6 Ground Surfaces
The type of surface material selected and play area use levels will determine the frequency of inspection and maintenance activities....
-
11B-1008.2.6 Ground surfaces
The type of surface material selected and play area use levels will determine the frequency of inspection and maintenance activities....
-
1132A.4, Item 4
Secondary exterior doors onto decks, patios or balcony surfaces constructed of impervious materials (e.g., concrete, brick, flagstone) may have a maximum change in height from the interior...
-
E202.3 Federal Contracts
ICT that is incidental to a contract includes materials which are, themselves, not deliverables under the contract....
-
7.2(2)(iii)
folding shelf attached to the main counter on which an individual with disabilities can write, and (2) use of the space on the side of the counter or at the concierge desk, for handing materials...
-
11B-1008.2.6 Ground surfaces
The type of surface material selected and play area use levels will determine the frequency of inspection and maintenance activities....
-
§ 38.125(c)(1) Design load
pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26 inches by 26 inches, with a safety factor of at least 3 based on the ultimate strength of the material...
-
§ 38.95(c)(1) Design load
pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26 inches by 26 inches, with a safety factor of at least 3 based on the ultimate strength of the material...
-
11B-705.1.1.3 Color and Contrast
The material used to provide visual contrast shall be an integral part of the surface....
-
11B-1008.2.6 Ground surfaces
The type of surface material selected and play area use levels will determine the frequency of inspection and maintenance activities. ◼...
-
General comments regarding safe harbor. (Section-by-Section Analysis)
Some businesses opposed the application of a safe harbor and, instead, encouraged the government to consider other avenues for reducing costs, like providing tax relief for businesses. ...