The outlet of the dispenser shall be 15 inches (380 mm) minimum and 48 inches (1220 mm) maximum above the finish floor and shall not be located behind grab bars....
Search Results "L-Shaped Grab Bar"
Filters
Commonly Searched Documents
-
604.7 Dispensers
-
RECOMMENDATIONS
Permit rear or floor mounted swing-away grab bars on both sides of the toilet....
-
Cross Section of Gripping Surfaces
The 2004 ADA and ABA Accessibility Guidelines specify the following dimensions for grab bars to enable individuals with disabilities to firmly grasp the grab bars and support themselves...
-
TownSteel MS Series, Grade 1 with "L" Rose Mortise Locks
The "L" rose is 13/32" in height and 2 17/32" in diameter. Both clutched and non-clutched chassis are available. 8 commercial lever and knob in 8 BHMA finishes to select from....
-
AJW Architectural Products UJ14 Series UJ14A Hook Strip 26"L, 3 Hooks - Surface Mounted
Verify Style: UJ14A: 26"L (660mm) with 3 hooks. UJ14B: 36"L (914mm) with 4 hooks. UJ14C: 46"L (1168mm) with 5 hooks. UJ14D: 56"L (1422mm) with 6 hooks....
-
Roadtech Manufacturing Retractable Cone Bar Barricades and Barriers
Retractable Cone Bar Barricades and Barriers Pedestrian Barricades | Traffic Control Barricades | Safety Barrier The JBC Retractable Cone-Bar Barricade is...
-
5.4.6 Transfer Support Gripping Surface Cross Section and Clearances for M301, M302, and M305.2
NPRM Preamble Discussion: The 2010 Standards specify the following dimensions for grab bars to enable individuals with disabilities to firmly grasp the grab bars and support themselves during...
-
604.7 Dispensers
The outlet of the dispenser shall be 15 inches (380 mm) minimum and 48 inches (1220 mm) maximum above the finish floor and shall not be located behind grab bars....
-
Types of Alternative Designs
The positioning and type of grab bars were also changed to provide more room and flexibility....
-
§ 36.304(d)(2)(iii)(L)(1)
(1) Team or player seating, section 221.2.1.4.
-
§ 36.304(d)(2)(iii)(L)(2)
(2) Accessible route to bowling lanes, section 206.2.11.
-
§ 36.304(d)(2)(iii)(L)(3)
(3) Accessible route in court sports facilities, section 206.2.12.
-
604 Water Closets and Toilet Compartments
Revisions to the requirements for water closets concern: location (604.2) clearance (604.3) grab bars (604.5) flush controls (604.6) dispensers (...
-
Size and Clearances [4.21.2]
The 36 by 36 inch dimension, measured to the interior finish, keeps front and side grab bars within reach from the seat....
-
Section 1630.2(l) Regarded as Substantially Limited in a Major Life Activity
Section 1630.2(l) Regarded as Substantially Limited in a Major Life Activity Coverage under the “regarded as” prong of the definition of disability should not be difficult to establish...
-
Space Needs
Maximum Height: No Grab Bars/No Backrest Angle (degrees) 0.0 18.0 30.0 53.0 90.0 90.0...
-
ADA Solutions, Inc. Directional Bar Tile
We understand and cater to the specific need for Directional Bar and Guide Surface Tiles to guide pedestrians across roadways and all walking surfaces. ...
-
1607.8 Loads on handrails, guards, grab bars shower seats, dressing room bench seats and seats
[See subsections ...]
-
HEWI Panic Bar EN 1125
HEWI panic bars can be operated intuitively with minimum effort and therefore fulfil the EN 1125 requirements for panic door devices. ...
-
Is latch-side maneuvering clearance as specified in the Standards applicable to doors with panic bars?
maneuvering clearances specified for a door, including on the push side of doors with a forward approach that have both a closer and latch, it must be provided at manual doors with panic bars...
-
Standard Roll-In Type Shower Compartments: ADA Standard Section 608.5.2
Section 608.5.2 covers the current ADA Standards for controls in standard roll-in type shower compartments.
-
Alternate Roll-In Type Shower Compartments: ADA Standard Section 608.5.3
Section 608.5.3 covers the current ADA Standards for controls in alternate roll-in type shower compartments.
-
Measures and Procedures
bar (fixed height of 32” or 81.3 cm) and allows for attaching/detaching side guards (e.g. obstacle to transfer) and an optional front grab bar of varying height (Figure 1) of 19”-38” (48.3...
-
AJW Architectural Products UJ11 Series UJ11A Coat Hook Strip 24"L, 3 Hooks - Surface Mounted
Verify Style: UJ11A: 24"L (610mm) with 3 hooks. UJ11B: 36"L (914mm) with 4 hooks. UJ11C: 46"L (1168mm) with 5 hooks....
