Section 234.4.2 covers the most current ADA scoping requirements for the minimum number of wheelchairs spaces, transfer seats or devices at existing amusement rides.
Search Results "Assurances from Contractors"
-
Minimum Number: ADA Standard Section 234.4.2
-
Transfer Steps: ADA Standard Section 1008.3.2
Transfer steps shall be provided where movement is intended from transfer platforms to levels with elevated play components required to be on accessible routes....
-
11B-812.7.3 Lettering
The words “NO PARKING” shall be painted on the surface within each access aisle in letters a minimum of 12 inches (305 mm) in height and located to be visible from the adjacent vehicular...
-
11B-221.6 Semi-ambulant seats
ETA Editor's Note The following Access Board Note was taken from ADA Title II §35.151(g) New Construction and Alterations; Assembly Areas, and from ADA Title III §36.406(f) Standards...
-
11B-221.6 Semi-ambulant seats
ETA Editor's Note The following Access Board Note was taken from ADA Title II §35.151(g) New Construction and Alterations; Assembly Areas, and from ADA Title III §36.406(f) Standards...
-
Conditions for an Exception in FSTAG
Conditions for an exception are not blanket exemptions from all of the technical requirements for an entire trail....
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
11B-608.3.2 Standard roll-in type shower compartments
Grab bars shall be installed 6 inches (152 mm) maximum from adjacent walls. [2010 ADA Standards] 608.3.2 Standard Roll-In Type Shower Compartments....
-
11B-608.3.2 Standard roll-in type shower compartments
Grab bars shall be installed 6 inches (152 mm) maximum from adjacent walls. [2010 ADA Standards] 608.3.2 Standard Roll-In Type Shower Compartments....
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
Site Impracticality Determinations
These commenters recommended a higher slope criterion ranging anywhere from 12% to 30%....
-
Transfer Height: ADA Standard Section 1002.5.2
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
Implications
Implications The qualitative data from the on-site inspections support the perceived advantages and disadvantages of the unitary and loose fill materials as described in the literature...
-
11B-234.4.2 Minimum number
Where the structural or operational characteristics of an amusement ride are altered to the extent that the amusement ride’s performance differs from that specified by the manufacturer or...
-
11B-1008.3.2 Transfer steps
Transfer steps shall be provided where movement is intended from transfer platforms to levels with elevated play components required to be on accessible routes....
-
11B-106.2 Terms defined in referenced standards
Terms not listed in Section 11B-106.5 and not defined in Chapter 2, Section 202, but specifically defined in a referenced standard, shall have the specified meaning from the referenced standard...
-
11B-234.4.2 Minimum number
Where the structural or operational characteristics of an amusement ride are altered to the extent that the amusement ride’s performance differs from that specified by the manufacturer or...
-
11B-1008.3.2 Transfer steps
Transfer steps shall be provided where movement is intended from transfer platforms to levels with elevated play components required to be on accessible routes....
-
11B-106.2 Terms defined in referenced standards
Terms not listed in Section 11B-106.5 and not defined in Chapter 2, Section 202, but specifically defined in a referenced standard, shall have the specified meaning from the referenced standard...
-
Appendix B to Part 382—Cross-Reference Table
1 1 Purpose. 3 7 Applicability. 5 3 Definitions. 7 11, 13 Non-discrimination generally. 9 15 Contractors...
-
Appendix B – Cross-Reference Table
1 1 Purpose. 3 7 Applicability. 5 3 Definitions. 7 11, 13 Non-discrimination generally. 9 15 Contractors...
-
II. STANDARD OF LAW
Contractors Ass'n., 809 F.2d 626, 630–31 (9th Cir.1987). The evidence presented by the parties must be admissible. Fed.R.Civ.P. 56(c)....