Mounts centered through toilet partitions, 1/2–2" (12–50mm) thick; used from both sides. Holds four standard core toilet tissue rolls up to 5 1/8" (130mm) diameter; two for each side....
Search Results "Toilet Room Signage"
-
Bobrick Partition-Mounted Multi-Roll Toilet Tissue Dispenser (Serves 2 Compartments) B-386
-
11B-219.2 Required systems
An assistive listening system shall be provided in assembly areas, including conference and meeting rooms. [2010 ADA Standards] 219.2 Required Systems....
-
11B-219.2 Required systems
An assistive listening system shall be provided in assembly areas, including conference and meeting rooms. [2010 ADA Standards] 219.2 Required Systems....
-
Gamco Partition Mounted Dual-Sided Multi-Roll Toilet Tissue Dispenser - TTD-7
Mounts centered through toilet partitions, 1/2"-2" (12-50mm) thick; used from both sides....
-
11B-805.2.3 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-805.2.3 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
American Specialties Recessed Dual Roll Toilet Paper Holder 74022
Recessed Dual Roll Toilet Paper Holder shall hold and dispense all standard core roll tissue up to 6" diameter (Ø152) roll and shall be fabricated of stainless steel type 304 alloy 18-8....
-
Sign
NOTES Sign Clarification of terminology regarding accessibility requirements for “signs” as individual building elements as opposed to “signage...
-
Printable Room Layouts
include layouts as an addendum to your facility contract, provide them in a pre-meeting with facility and banquet staff, and use them with your internal planning team to ensure that your rooms...
-
4.16.6 Dispensers
Few of the respondents specifically addressed the issue of dispensers, even though increasing the distance between the sidewall and the toilet would suggest that locating dispensers on the...
-
Pictogram Field: ADA Standard Section 703.6.1
Pictograms shall have a field height of 6 inches (150 mm) minimum. Characters and braille shall not be located in the pictogram field.
-
Braille: ADA Standard Section 703.3
Braille shall be contracted (Grade 2) and shall comply with 703.3 and 703.4.
-
TACTILE SIGN
[DSA-AC] A sign containing raised characters and/or symbols and accompanying Braille.
-
11B-703.3 Braille
Braille shall be contracted (Grade 2) and shall comply with Sections 11B-703.3 and 11B-703.4. Advisory 11B-703.3 Braille. Contracted Braille uses special characters called...
-
11B-703.6.1 Pictogram field
Pictograms shall have a field height of 6 inches (152 mm) minimum. Characters and Braille shall not be located in the pictogram field. Advisory 11B-703.6.1 Pictogram field....
-
11B-703.3 Braille
Braille shall be contracted (Grade 2) and shall comply with Sections 11B-703.3 and 11B-703.4. Advisory 11B-703.3 Braille. Contracted Braille uses special characters called...
-
11B-703.6.1 Pictogram field
Pictograms shall have a field height of 6 inches (152 mm) minimum. Characters and Braille shall not be located in the pictogram field. Advisory 11B-703.6.1 Pictogram field....
-
TACTILE SIGN
[DSA-AC] A sign containing raised characters and/or symbols and accompanying Braille.
-
American Specialties Dual Roll Surface Mounted Toilet Paper Holder 7305-2
Dual Roll Surface Mounted Toilet Paper Holder unit shall hold and dispense two (2) rolls of standard core roll tissue up to 5- 1/2" (140mm) diameter....
-
1007.9 Signage
1007.9 Signage. Signage indicating special accessibility provisions shall be provided as shown: 1....
-
Which Paths Lead to Usable Circulation Paths?
Any circulation paths that are not usable should include signs directing people to other, usable paths. People with limited mobility should be provided with written directions, a...
-
11B-703.7.2.6.4 Edges and corners
Edges of signs shall be rounded, chamfered or eased. Corners of signs shall have a minimum radius of 1/8 inch (3.2 mm).
-
11B-703.7.2.6.4 Edges and vertices on geometric symbols
11B-703.7.2.6.4 Edges and vertices on geometric symbols. Edges shall be eased or rounded at 1/16 inch (1.59 mm) minimum, or chamfered at 1/8 inch (3.2 mm) maximum. Vertices shall be...
-
11B-703.7.2.6.4 Edges and vertices on geometric symbols
Edges shall be eased or rounded at 1/16 inch (1.59 mm) minimum, or chamfered at 1/8 inch (3.2 mm) maximum. Vertices shall be radiused between 1/8 inch (3.2 mm) minimum and ¼ inch...
