Kitchens shall have a minimum clear width measured between any cabinet, work surface or the face of any appliance (excluding handles and controls) and the opposing cabinet, work...
Search Results "Residential Dwelling Unit for Sale"
-
11B-809.9.2 Clear width
-
11B-809.10.7.5 Controls
Controls shall be mounted 44 inches (1118 mm) maximum above the finish floor. The force required to activate controls shall be 5 pounds (22.2 mm) maximum.
-
11B-809.10.8.3 Cabinets
Cabinets shall be removable without the use of specialized knowledge and/or tools. The finished floor shall extend to the wall under the lavatory.
-
11B-809.9.7 Exposed pipes and surfaces
Exposed water supply and drain pipes under sinks and lavatories shall comply with Section 11B-606.5.
-
7(2) Usable bathrooms
To meet the requirements of section 100.205(c)(3)(iv) either: All bathrooms in the dwelling unit comply with the provisions of paragraph (a); or At least one bathroom in the dwelling...
-
224.1 General
Facilities with Residential Units and Transient Lodging Units....
-
11B-604.5 Grab bars
In residential dwelling units, grab bars shall not be required to be installed in toilet or bathrooms provided that reinforcement has been installed in walls and located so as to permit...
-
11B-809.10.6.1 Size
When one or more shower stalls are provided within the same dwelling unit, as least one shower stall shall comply with one of the following: A transfer type shower compartment...
-
11B-604.5 Grab bars
In residential dwelling units, grab bars shall not be required to be installed in toilet or bathrooms provided that reinforcement has been installed in walls and located so as to permit...
-
11B-604.5 Grab bars
In residential dwelling units, grab bars shall not be required to be installed in toilet or bathrooms provided that reinforcement has been installed in walls and located so as to permit...
-
Parking at Residential Facilities
Parking at residential facilities is addressed in section 208.2.3....
-
Taylor ADA Blue-Lever Stands Intro.
Introduction to Taylor ADA Blue Lever Stands for point of sale machines....
-
Taylor ADA BLue-Lever™ Stand
Our Features and Benefits Access for All Assistive Auxiliary ADA TITLE III (Wheelchair or Standing) will have ease of use at Checkout. ADA True...
-
VI. Relationship to Other Laws
with certain features of accessible design.22 The FHAct design and construction requirements apply to ‘‘covered multifamily dwellings’’ designed and constructed for first occupancy after...
-
Doors in a Series
Doors in a series are not typically part of an individual dwelling unit. Doors in a series generally are used in the entries to buildings, and are therefore part of public spaces....
-
(3) Doors within individual dwelling units
The final Guidelines recommend that doors intended for user passage within individual dwelling units have a clear opening of at least 32 inches nominal width when the door is open 90 degrees...
-
11B-809.9.1 Clear floor space
Clear floor spaces 30 inches (762 mm) by 48 inches (1219 mm), with centerlines aligned with the centerline of the work surface, appliance, sink or fixture, shall be provided in the...
-
11B-809.10.4 Sufficient maneuvering space
Where doors swing into the toilet and bathing or powder rooms required to comply with Section 11B-809.10, a clear maneuvering space of 30 (762 mm) inches by 48 inches (1219 mm)...
-
11B-809.10.4 Sufficient maneuvering space
Where doors swing into the bathrooms or powder rooms required to comply with Section 11B-809.10, a clear maneuvering space of 30 (762 mm) inches by 48 inches (1219 mm) minimum shall...
-
11B-809.9.1 Clear floor space
Clear floor spaces 30 inches (762 mm) by 48 inches (1219 mm), with centerlines aligned with the centerline of the work surface, appliance, sink or fixture, shall be provided in the...
-
Section 4. Application of the Guidelines
This section states that the design specifications that comprise the final Guidelines apply to all "covered multifamily dwellings" as defined in Section 2 of the Guidelines....
-
T-turn Maneuvering Space
The Guidelines adequately address the accessible route into and through the dwelling unit by the minimum corridor width and door width specifications, given typical apartment layouts....
-
904 Sales and Service Counters
This section covers the approach to counters (904.2), check-out aisles (904.3), sales and service counters (904.4), food service lines (904.5), and security glazing (904.6)....
-
904 Check-Out Aisles and Sales and Service Counters
904 Check-Out Aisles and Sales and Service Counters...
