CONCLUSIONS The results of this pilot study suggest: • Surfaces that can be objectively measured as firm and stable generally require less energy, are perceived as less strenuous,...
Search Results "Post Mounted Object"
Commonly Searched Documents
-
CONCLUSIONS
-
Using the Tape Measure
A tape measure is used to measure the length, width, height, and depth of various elements including parking spaces and access aisles, routes, thresholds, doorways, and protruding objects...
- AJW Architectural Products U852 Dual Stall Seat Cover Dispenser - Partition Mounted
-
Location
is not with excessive space requirements or even required clearances; but more with achieving non-institutional appearances and being required to install assistive devices, such as wall-mounted...
- Bobrick B-30929 ClassicSeries® Surface-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
-
M20
Is there a horizontal grab bar at least 36 inches long securely mounted behind the toilet 33 to 36 inches above the floor with one end no more than 6 inches from the side wall?...
-
4.19.2 HEIGHT AND CLEARANCES
Lavatories shall be mounted with the rim or counter surface no higher than 34 in (865 mm) above the finished floor....
- BEA Inc. Magic Switch Hardwired Touchless Sensor Door Opener MS21H (Wave to Open)
- AJW Architectural Products U116 16 oz. ABS Liquid Soap Dispenser - Surface Mounted
-
F225.2.2 Self-Service Shelving
Self-service shelves include, but are not limited to, library, store, or post office shelves....
-
225.2.2 Self-Service Shelving
Self-service shelves include, but are not limited to, library, store, or post office shelves....
-
13.6 Brand Standards
13.6 “Brand Standards” means the standards for each Brand contained in the integrated Brand Standards Manual for that Brand posted on HWI’s intranet, together with supplemental documents...
- Bobrick B-30919 ClassicSeries® Surface-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
-
Non-Circular Cross Section and Clearance (§505.5, §505.7)
Non-Circular Cross Section and Clearance Recommendation: Projecting objects above handrails can impact their usability....
-
H22
Is a second horizontal grab bar at least 36 inches long securely mounted on the back wall with one end no more than 6 inches from the side wall 33 to 36 inches above the floor?...
-
M19
Is a horizontal grab bar at least 40 inches long securely mounted on the adjacent side wall 33 to 36 inches above the floor with one end no more than 12 inches from the back wall?...
-
Laundry Room
Elevated water saving washer and elevated dryer with front-mounted controls Recycling bins and composter (eliminating the need for a garbage disposal) LED tread lights...
-
4.19.2 Height and Clearances
Lavatories shall be mounted with the rim or counter surface no higher than 34 in (865 mm) above the finish floor....
-
Flush Controls [4.18.4]
Flush Controls [4.18.4] Flush controls must be mounted no more than 44 inches above the finished floor and must: be automatic or operable by one hand operate without...
-
A4.34.6.10 KITCHEN STORAGE
Full height cabinets or tall cabinets can be provided rather than cabinets mounted over work counters....
-
C. Accessibility Within Toilet Rooms
Is at least one stall at least 60 inches wide and 56 inches deep (wall mounted toilet) or 59 inches deep (floor mounted toilet)?...
-
11B-606.3 Height
ETA Editor's Note Top-mounted sinks installed in counters having the top surface 34 inches above the floor will exceed the maximum rim height allowed, regardless of how thin the flange...
-
Parking Spaces [4.6.3]
For vans with side-mounted lifts, a combined width of almost 17 feet is often needed for the deployment and use of side-mounted lifts; ADAAG requires at least 16 feet....
-
11B-606.3 Height
ETA Editor's Note Top-mounted sinks installed in counters having the top surface 34 inches above the floor will exceed the maximum rim height allowed, regardless of how thin the flange...