New construction requirements also set the baseline for any alteration that would effectively reduce existing accessibility....
Search Results "Maintenance of Accessible Feature"
Filters
Commonly Searched Documents
-
Prohibited Reduction in Access
-
Physical Access
# Physical Access Yes No Unsure Comments and follow up C....
-
11B-809.10.3 Powder rooms
When the powder room is the only toilet facility located on an accessible level it shall, in addition, comply with Sections 11B-809.10.4, 11B-809.10.7 and 11B-809.10.8....
-
R. Program Access
"Program Access" means applicable Accessibility Laws directing a public entity to operate each service, program, or activity so that the service, program, or activity, when viewed in its...
-
703.7 Symbols of Accessibility
703.7 Symbols of Accessibility. Symbols of accessibility shall comply with 703.7....
-
11B-411.2.1.2.3 Accessibility function button
The accessibility function button shall be identified by the International Symbol of Accessibility and a raised indication....
-
Platform Lifts: ADA Standard Section 206.7
Section 206.7 covers scoping requirements in the most current ADA Standards for accessible routes to platform lifts.
-
T215 Communication Features
[See subsections ...]
-
Accessibility Evaluation Survey
Accessibility Evaluation Survey—An activity comparing each portion of a structure to the accessibility standards and recording compliance and deficiencies....
-
Handi-Ramp Galvanized Steel Ramps
Made from galvanized steel that is extra strong and rust resistant, Handi-Ramp's Galvanized Steel Access Ramps have a nonskid surface built into the permanent wheelchair ramp which provides...
-
11B-809.10.8.7 Mirrors and towel bars
Where mirrors are provided the bottom edge of the reflective surface shall be 40 inches (1016 mm) maximum above the finish floor. Where towel bars are provided they shall be...
-
11B-809.10.8.6 Controls
Faucet controls and operating mechanisms shall comply with Section 11B-309.4.
-
11B-809.10.6.4 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: Continuous reinforcement shall be installed in the walls of showers 30 inches (762 mm) maximum to 38 inches (965 mm)...
-
Vertical Access to Mezzanines
The Board has clarified requirements for vertical access to mezzanines....
-
7.4.8 Protruding Objects
Constructed features, including signs, shall not extend into the trail tread more than 4 inches (100 mm) between 27 inches (685 mm) and 80 inches (2030 mm) above the surface of the trail...
-
A9. Accessible Route
Does each access aisle connect to an accessible route from the parking area to the accessible building entrance? [ADA Stds 4.6.2] Yes _____ No _____...
-
502.7 Relationship to Accessible Routes
502.7 Relationship to Accessible Routes....
-
B. Access Aisles
Does each accessible parking space have or share an adjacent access aisle to allow persons who use wheelchairs, walkers or other mobility aids to transfer from their car/van?...
-
Number of accessible cells. (Section-by-Section Analysis)
Number of accessible cells....
-
502.7 Relationship to Accessible Routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
502.7 Relationship to Accessible Routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
Must van accessible spaces be restricted to van use?
The required "van-accessible" designation is informative, not restrictive, in identifying those spaces that are better suited for van use and does not restrict the use of spaces to vans...
-
II-3.4200 Relationship to "program accessibility" requirement.
II−3.4200 Relationship to "program accessibility" requirement....
-
Accessible Icon Project
The Accessible Icon Project is an ongoing work in design activism, begun in 2010....
