Floor or ground surfaces of clearances shall comply with Section 11B-302. Changes in level are not permitted....
Search Results "Floor Button"
Commonly Searched Documents
- 
    
  
  11B-813.2.1.2 Clearance
  
 - 
    
  
  10.2.1(2)
  
or replaced bus shelters shall be installed or positioned so as to permit a wheelchair or mobility aid user to enter from the public way and to reach a location, having a minimum clear floor...
 - 
    
  
  11B-1002.6.1 Clear floor or ground space
  
A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the transfer device....
 - 
    
  
  11B-1002.6.1 Clear floor or ground space
  
A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the transfer device....
 - 
    
  
  11B-1002.6.1 Clear floor or ground space
  
A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the transfer device....
 - 
    
  
  § 38.73(d)(1) Requirements
  
the boarding platform or mini-high platform design so that the horizontal gap between a vehicle at rest and the platform shall be no greater than 3 inches and the height of the vehicle floor...
 - 
    
  
  Recessed Lavatories
  
(If the clear floor space at the lavatory is obstructed on both sides more than 2 feet then it must be at least 36 inches wide instead of 30 inches.)...
 - 
    
  
  11B-305.6 Approach
  
One full unobstructed side of the clear floor or ground space shall adjoin an accessible route or adjoin another clear floor or ground space. ...
 - 
    
  
  11B-305.6 Approach
  
One full unobstructed side of the clear floor or ground space shall adjoin an accessible route or adjoin another clear floor or ground space. ...
 - 
    
  
  11B-305.6 Approach
  
One full unobstructed side of the clear floor or ground space shall adjoin an accessible route or adjoin another clear floor or ground space....
 - 
    
  
  § 38.53(d)(1) Requirements
  
coordinated with the boarding platform design such that the horizontal gap between each vehicle door at rest and the platform shall be no greater than 3 inches and the height of the vehicle floor...
 - 
    
  
  1134A.8, Item 5
  
Finished floor. The finished floor beneath the lavatory shall be extended to the wall....
 - 
    
  
  1134A.8, Item 5
  
Finished floor. The finished floor beneath the lavatory shall be extended to the wall....
 - Figure 305.5 Position of Clear Floor or Ground Space – Drawing from the U.S. Access Board
 - Pushbutton Transmitter (BE1240)
 - 
    
  
  11B-707.2 Clear floor or ground space
  
A clear floor or ground space complying with Section 11B-305 shall be provided....
 - 
    
  
  11B-707.2 Clear floor or ground space
  
A clear floor or ground space complying with Section 11B-305 shall be provided....
 - 
    
  
  11B-233.3.1.2.6.3 Test number two, site analysis test
  
For a site having multiple buildings, or a site with a single building with multiple entrances, it is not required to provide a building entrance on an accessible route to all ground floor...
 - 
    
  
  5.3.2.2 Surface
  
The surface of the turning space and clear floor or ground space shall be firm and stable. ...
 - 
    
  
  § 38.23(d)(2) Location and size
  
The securement system shall be placed as near to the accessible entrance as practicable and shall have a clear floor area of 30 inches by 48 inches....
 - 
    
  
  306.1 General
  
Where space beneath an element is included as part of clear floor or ground space or turning space, the space shall comply with 306....
 - 
    
  
  306.1 General
  
Where space beneath an element is included as part of clear floor or ground space or turning space, the space shall comply with 306....
 - 
    
  
  306.1 General
  
Where space beneath an element is included as part of clear floor or ground space or turning space, the space shall comply with 306....
 - 
    
  
  11B-302.3 Openings
  
Openings in floor or ground surfaces shall not allow passage of a sphere more than ½ inch (12.7 mm) diameter except as allowed in Sections 11B-407.4.3, 11B-409.4.3, 11B-410.4, 11B-810.5.3...