In buildings containing covered multifamily dwelling units, the floor or landing immediately outside the entry may be sloped up to ¼ inch (6.35 mm) per foot (12 inches) (305 mm), in a direction...
Search Results "Direct Threat"
2010 ADA Definition
Direct Threat: Direct threat means a significant risk to the health or safety of others that cannot be eliminated by a modification of policies, practices, or procedures, or by the provision of auxiliary aids or services, as provided in § 36.208 [2010 ADA Title III Regulations].
Filters
Commonly Searched Documents
-
1132A.4, Item 5
-
§ 38.159(d)(5) Movement
secured in accordance with manufacturer's instructions, the securement system shall limit the movement of an occupied wheelchair or mobility aid to no more than 2 inches (50 mm) in any direction...
-
11B-411.2.1.2.4 Display screen
accessibility function button, the display screen shall display information including but not limited to, operating instructions, user input confirmation, elevator assignment characters, direction...
-
Wagner Instruments Chatillon® DFE Digital Force Gauge
The same useful firmware features are shared, in addition, the E-DFE provides bi-directional RS232 output for motorized test stand control and computer data collection and graphing....
-
SciFit Inclusive Fitness PRO1 - Upper Body Machine
Color-coded adjustments and Braille locators Adjustable tilt head for all heights and ranges of motion True, adjustable step-through accessibility Bi-directional exercise Iso-Strength...
-
810.5.1 Slope
Rail platforms shall not exceed a slope of 1:48 in all directions....
-
11B-810.5.1 Slope
Rail platforms shall not exceed a slope of 1:48 in all directions....
-
810.5.1 Slope
Rail platforms shall not exceed a slope of 1:48 in all directions....
-
Landings
Must be as wide as the ramp they connect to A minimum length of 60 inches (1525 mm) If ramps change direction, the minimum landing size must be 60 inches (1525 mm) wide...
-
§35.163(b)
(b) A public entity shall provide signage at all inaccessible entrances to each of its facilities, directing users to an accessible entrance or to a location at which they can obtain information...
-
4.3.3 Slope
The slope of tent pads and tent platforms shall not exceed 1:48 (2 percent) in any direction. Exception. ...
-
4.13.7 Two Doors in Series
Doors in series shall swing either in the same direction or away from the space between the doors (see Fig. 26)....
-
4.13.7 TWO DOORS IN SERIES
Doors in series shall swing either in the same direction or away from the space between the doors (see Fig. 26)....
-
4.3.3 Slope
The slope of tent pads and tent platforms shall not exceed 1:48 (2 percent) in any direction. Exception....
-
1014.3 Floor
This section requires the floor surface within camp shelters to be firm and stable and to slope not steeper than 1:48 in any direction....
-
1013.3 Slope
This section requires the slope of the surface of tent pads, tent platforms, and clear ground spaces to not be steeper than 1:48 in any direction....
-
§ 35.163(b)
(b) A public entity shall provide signage at all inaccessible entrances to each of its facilities, directing users to an accessible entrance or to a location at which they can obtain information...
-
11B-810.5.1 Slope
Rail platforms shall not exceed a slope of 1:48 in all directions....
-
11B-810.5.1 Slope
Rail platforms shall not exceed a slope of 1:48 in all directions....
-
1013.3 Slope
The slope of the surface of tent pads, tent platforms, and clear ground spaces shall not be steeper than 1:48 in any direction....
-
R308.1.2.2 Slope
Boarding platforms shall not exceed a slope of 2 percent in any direction....
-
405.3 Cross Slope
Cross slope is the slope of the surface perpendicular to the direction of travel. Cross slope is measured the same way as slope is measured (i.e., the rise over the run)....
-
11B-411.2.1.2.4 Display screen
function button, the display screen shall display information on the location and use of the star (*) and minus sign (-) buttons, user input confirmation, elevator assignment characters, direction...
-
4.7.5 Openings
Where possible, elongated openings should be placed perpendicular, or as close to perpendicular as possible, to the dominant direction of travel....
