Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
Search Results "Character Style (Visual)"
Filters
Commonly Searched Documents
-
11B-703.3.2 Position
-
Position: ADA Standard Section 703.3.2
Braille shall be separated 3/8 inch (9.5 mm) minimum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements....
-
Stroke Thickness: ADA Standard Section 703.5.7
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 30 percent maximum of the height of the character....
-
American Council of the Blind of Ohio (ACBO)
Our members include both persons who are blind and visually impaired, and people who are fully sighted, all working together to achieve our goals....
-
11B-703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (457 mm) minimum by 18 inches (457 mm) minimum, centered on the tactile characters, is provided...
-
11B-703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (457 mm) minimum by 18 inches (457 mm) minimum, centered on the tactile characters, is provided...
-
11B-703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (457 mm) minimum by 18 inches (457 mm) minimum, centered on the tactile characters, is provided...
-
Pictogram Field: ADA Standard Section 703.6.1
Characters and braille shall not be located in the pictogram field....
-
1.8 Designed Theaters
1.8 "Designed Theaters" shall mean and refer to those Cinemark stadium-style movie theaters for which designs have been completed as of the Effective Date of this Consent Order that...
-
11B-216.7 Elevators
that comply with these building standards shall have the location of and the directions to these elevators posted in the building lobby on a sign complying with Section 11B-703.5 _|Signs; Visual...
-
R213 Transit Stops and Transit Shelters
Signs that identify the routes served by the transit stop must comply with the technical requirements for visual characters on signs unless audible sign systems or other technologies are...
-
11B-216.7 Elevators
that comply with these building standards shall have the location of and the directions to these elevators posted in the building lobby on a sign complying with Section 11B-703.5 _|Signs; Visual...
-
E. Tray Slides
If cafeteria style food service lines are provided, are the tray slides no higher than 34" above the floor and queue lines at least 36" wide (42" minimum if u-turns are required) along the...
-
11B-411.4.11.3 Duration
Floor destination characters shall be displayed upon elevator car arrival at the input floor and shall not extinguish until the elevator car arrives at the destination floor....
-
Text that is too long, verbose, wordy, replete in longness, just too much etc.
However, a good rule of thumb is a few sentences or about 160 characters. “Line chart showing average monthly dog treat distribution....
-
1.16 Traditional, sloped-floor or traditional seating
Prior to the introduction of stadium-style seating in 1995, almost all seating in movie theaters was located on this type of sloped floor....
-
11B-705.1.1.3.2
Detectable warning surfaces shall provide a 70 percent minimum visual contrast with adjacent walking surfaces....
-
USDA Forest Service Built Environment Image Guide (BEIG)
Within eight geographically defined architectural character types, BEIG emphasizes design that projects the overall Forest Service image while echoing local values, heritage, and culture...
-
11B-216.9.2 Directional signs
Directional signs shall comply with Section 11B-703.5 _|Signs; Visual Characters|_ and shall include the International Symbol of TTY complying with Section 11B-703.7.2.2....
-
11B-207.1 General
The directional signs must comply with the requirements of Section 11B-703.5 for visual characters. ◼...
-
H.
Standard 4.33.3 and the United States' interpretation thereof provided insufficient guidance for theater designers about the proper placement of wheelchair seating areas in its stadium-style...
-
Duration
People commented the narration pace was slow and the style dramatic....
-
703.4.1 Height Above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
703.4.1 Height Above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
