This single station stainless steel basin is designed to meet ligature resistant needs and ADA Compliancy....
Search Results "Teeing Station"
Commonly Searched Documents
- Whitehall Mfg. WH3740 Ligature Resistant Stainless Steel Basin
-
Adjustable gap protocol
protocol: From initial setup, just the horizontal distance between the WMD and platform was incrementally increased by placing plywood blocks of 3.5” (8.9cm) width between the transfer station...
-
§ 38.113(d)(1) Requirements
Cars which provide level-boarding in stations with high platforms shall be coordinated with the boarding platform or mini-high platform design such that the horizontal gap between a car...
-
§ 38.125(b)(8) Platform entrance ramp
The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8, when measured on level ground, for a maximum rise of 3 inches, and the transition from station...
-
§ 38.83(b)(8) Platform entrance ramp
The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8 measured on level ground, for a maximum rise of 3 inches, and the transition from the station platform...
-
§ 38.95(b)(8) Platform entrance ramp
The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8, when measured on level ground, for a maximum rise of 3 inches, and the transition from station...
-
Dining Surface and Work Surface
In addition, the Board has indicated in the ADA scoping provisions that the types of work surfaces covered do not include those surfaces used by employees since elements of work stations...
-
Section 4.1.1, Application (Preamble, Section-by-Section Analysis)
any area used only as a work area (not just to areas ‘‘that may be used by employees with disabilities’’), and that the guidelines do not require that any area used as an individual work station...
-
Where Platform Lifts are Permitted [§206.7]
only: wheelchair spaces, performance areas, and speakers’ platforms incidental spaces with a maximum occupancy of 5 that are not for public use raised courtroom stations...
-
Section 4.1.1, Application (Section-By-Section Analysis and Response to Comments)
any area used only as a work area (not just to areas "that may be used by employees with disabilities''), and that the guidelines do not require that any area used as an individual work station...
-
§ 38.125(b)(5) Platform barriers
The loading-edge barrier (outer barrier) which functions as a loading ramp when the lift is at ground or station platform level, shall be sufficient when raised or closed, or a supplementary...
-
11B-220.2 Point-of-sale devices
Point-of-sale devices at electric vehicle charging stations required to comply with Section 11B-812 shall comply with Section 11B-812.10.3....
-
§ 38.95(b)(5) Platform barriers
The loading-edge barrier (outer barrier) which functions as a loading ramp when the lift is at ground or station platform level, shall be sufficient when raised or closed, or a supplementary...
-
Section 37.61 Public Transportation Programs and Activities in Existing Facilities
The section clearly excludes from this requirement access by persons in wheelchairs, unless these changes would be necessitated by the alterations or key station provisions....
-
Work Areas
Those used only by employees at a work station (janitor closets) or as part of a work area (stockroom shelves) are not required to comply (although work areas must be on an accessible route...
-
Chapter 10: Recreation Facilities
The final rule adds technical requirements to Chapter 10 for outdoor constructed features (1011); parking spaces within camping units and picnic units and pull-up spaces at dump stations...
-
Circulation Paths Serving Exempted Spaces [§203]
spaces, or very narrow passageways; employee work areas under 300 sq. ft. that are elevated at least 7” as an essential functional condition of the space (excluding raised courtroom stations...
-
Is compliance on both sides of a door or gate required when it is usable only from one side?
Examples include exit-only doors with no operating hardware on the exterior side or separate enter and exit fare gates in transit stations....
-
§ 38.53(d)(1) Requirements
Where new vehicles will operate in new stations, the design of vehicles shall be coordinated with the boarding platform design such that the horizontal gap between each vehicle door at rest...
-
§ 38.173(b)
(b) Where the vehicle covered by paragraph (a) will operate in an accessible station, the design of vehicles shall be coordinated with the boarding platform design such that the horizontal...
-
§ 38.125(b)(3) Emergency operation
The lift shall incorporate an emergency method of deploying, lowering to ground or station platform level with a lift occupant, and raising and stowing the empty lift if the power to the...
-
11B-228.1 General
Electric vehicle charging stations shall comply with Section 11B-228.3. Exception: Drive-up only depositories shall not be required to comply with Section 11B-309....
-
226 Dining Surfaces and Work Surfaces
those used "for the consumption of food or drink" (226.1) clarify that the types of work surfaces covered do not include those surfaces used by employees, since elements of work stations...
-
Gangway Alterations
However, if the areas altered contain primary functions (such as a fishing station), existing gangways are considered part of the path of travel to the altered primary function areas and...