Diagnostic equipment shall be usable with portable patient lifts and, when in use with such lifts, shall comply with M301.4.1 or M301.4.2....
Search Results "Portable Seating"
-
M301.4 Lift Compatibility
-
5.2.2.2 Transfer Surface Depth
The transfer surface should be 17 inches deep minimum for equipment used by patients in a seated position....
-
5.2.2.1 Transfer Surface Width
The transfer surface should be 21 inches wide minimum for examination chairs and other equipment used by patients in a seated position....
-
M302.3.1 Transfer Supports (Section-by-Section Analysis)
In the MDE NPRM the Access Board proposed that transfer supports must be provided for use with transfer sides on diagnostic equipment used by patients in the seated position, and that these...
-
Bobrick B-30929 ClassicSeries® Surface-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
Toilet seat-cover dispenser holds 500 paper covers. Removable waste disposal for servicing. Capacity: 0.4-gal. (1.5-L). Patent Pending....
-
Bobrick B-30919 ClassicSeries® Surface-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
Toilet seat-cover dispenser holds 500 paper covers. Removable waste disposal for servicing. Capacity: 0.4-gal. (1.5-L). Patent Pending....
-
Service Animals
However, in order to guarantee your seat assignment, you should be aware that, depending on whether the carrier provides advance seat assignments and the type of seating method it uses,...
-
T605 Seat Belts and Shoulder Belts
[See subsections ...]
-
§382.117(b)
(b) You must permit the service animal to accompany the passenger with a disability at any seat in which the passenger sits, unless the animal obstructs an aisle or other area that must...
-
§ 35.138 Ticketing.
[See subsections ...]
-
M302.2.2 Size
The size requirements in this section apply only to the portion of the seat used for transfer....
-
Sidewalks and Walkways
Sidewalks and Walkways Problem If sidewalks and walkways are in disrepair, it can be difficult, and sometimes impossible, for a voter using a wheelchair or other mobility...
-
M301.4 Lift Compatibility
M301.4 Lift Compatibility M01.4.1 Clearance in Base Proposed requirement: The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150...
-
B. Assistive Listening Systems
B. Assistive Listening Systems. Assistive listening systems (ALS) are intended to augment standard public address and audio systems by providing signals which can be received...
-
221.2.3.1 Horizontal Dispersion
Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by 221.3 and wheelchair spaces are located within the 2nd or 3rd quartile...
-
221.2.3.1 Horizontal Dispersion
Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by 221.3 and wheelchair spaces are located within the 2nd or 3rd quartile...
-
4.1.6(3)(f)(i)
(i) Where it is technically infeasible to disperse accessible seating throughout an altered assembly area, accessible seating areas may be clustered....
-
11B-221.2 Wheelchair spaces
Wheelchair spaces complying with Section 11B-221.2 shall be provided in assembly areas with fixed seating. ...
-
11B-221.2 Wheelchair spaces
Wheelchair spaces complying with Section 11B-221.2 shall be provided in assembly areas with fixed seating....
-
11B-221.2.3.1 Horizontal dispersion
Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by Section 11B-221.3 and wheelchair spaces are located within the 2nd...
-
11B-221.2.3.1 Horizontal dispersion
Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by Section 11B-221.3 and wheelchair spaces are located within the 2nd...
-
11B-221.2.3.1 Horizontal dispersion
Exceptions: Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by Section 11B-221.3 and wheelchair spaces are located...
-
F221.2.3.1 Horizontal Dispersion
Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by F221.3 and wheelchair spaces are located within the 2nd or 3rd quartile...
