Section 604.1 of the ADA Standards covers information in the current ADA Standards for water closets and toilet compartments.
Search Results "Pass Through Kitchen"
Commonly Searched Documents
-
General: ADA Standard Section 604.1
-
11B-703.8.12 Protective covering
Where a protective layer is placed over VMS characters through which the VMS characters must be viewed, the protective covering shall have a non-glare finish....
-
Accessible Routes in Dwelling Units with Mobility Features
Sections 4.34.1 and 4.34.2 of the UFAS require the living area, kitchen and dining area, bedroom, bathroom, and laundry area, where provided, in covered dwelling units with mobility features...
-
Automated Airport Kiosk Definition and Applicability Based on Function/Location
and shared-use automated kiosks that provide flight-related services (including, but not limited to, ticket purchase, rebooking cancelled flights, seat selection, and obtaining boarding passes...
-
502.3 Access Aisle
Where possible, it is preferable that the accessible route not pass behind parked vehicles. Figure 502.3 Parking Space Access Aisle...
-
U.S. Air Carriers
Air Carriers In 1986, Congress passed the ACAA, which prohibits discrimination by U.S. air carriers against qualified individuals with disabilities. 49 U.S.C. 41705....
-
11B-809.10.5.4 Bathtub enclosures
When glass is used, it shall be 1/8 inch (3.2 mm) thick minimum when fully tempered, or 1/4 inch (6.4 mm) thick minimum when laminated, and shall pass the test requirements of this part,...
-
Visual Characters: ADA Standard Section 703.5
EXCEPTION: Where visual characters comply with 703.2 and are accompanied by braille complying with 703.3, they shall not be required to comply with 703.5.2 through 703.5.9....
-
Sloped Entries: ADA Standard Section 1009.3.1
Sloped entries shall comply with Chapter 4 except as modified in 1009.3.1 through 1009.3.3....
-
11B-206.4.4 Transportation facilities
In addition to the requirements of Sections 11B-206.4.2, 11B-206.4.3, and 11B-206.4.5 through 11B-206.4.9, transportation facilities shall provide entrances in accordance with Section 11B...
-
A Bird’s Eye View of the House Deliberations
All indications suggested that a bill would pass....
-
Conclusions
All the surfaces pass the existing specifications for impact attenuation of playground surfaces. 2....
-
New and Altered Fixed Guideway Stations: ADA Standard Section 218.2
Section 218.2 covers scoping requirements in the current ADA Standards for new and altered fixed guideway stations.
-
11B-208.3.2 Residential facilities
In residential facilities containing residential dwelling units required to provide mobility features complying with Sections 11B-809.2 through 11B-809.4, and adaptable features complying...
- Mannington Mills Classics II Collection Commercial Carpet
-
11B-211.2 Minimum number
When provided, one drinking fountain shall comply with Sections 11B-602.1 through 11B-602.6, 11B-602.8 and 11B-602.9 and one drinking fountain shall comply with Sections 11B-602.7 and 11B...
-
11B-221.2.1.1 General seating
151 to 300 5 301 to 500 6 501 to 5000 6, plus 1 for each 100, or fraction thereof, between 501 through...
-
Residential Facilities: ADA Standard Section 203.8
Section 203.8 covers scoping requirements of general exceptions for residential facilities in the most current ADA Standards.
-
11B-1009.3.1 Sloped entries
Sloped entries shall comply with Division 4 except as modified in Sections 11B-1009.3.1 through 11B-1009.3.3....
-
1134A.5, Item 5
When glass is used, it shall have minimum thickness of not less than 1/8 inch (3.17 mm) when fully tempered, or 1/4 inch (6.35 mm) when laminated, and shall pass the test requirements of...
-
1134A.6, Item 7
When glass is used, it shall have minimum thickness of not less than 1/8 inch (3.17 mm) when fully tempered, or ¼ inch (6.35 mm) when laminated, and shall pass the test requirements of this...
-
1018.4 Clear Width
This section requires the clear width of beach access routes to be 60 inches minimum to enable individuals who use wheeled mobility devices to pass beach visitors traveling in the opposite...
-
1134A.5, Item 5
When glass is used, it shall have minimum thickness of not less than 1/8 inch (3.17 mm) when fully tempered, or 1/4 inch (6.35 mm) when laminated, and shall pass the test requirements of...
-
1134A.6, Item 7
When glass is used, it shall have minimum thickness of not less than 1/8 inch (3.17 mm) when fully tempered, or ¼ inch (6.35 mm) when laminated, and shall pass the test requirements of this...