At least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of the partition...
Search Results "Non-Glare Finish"
-
11B-604.8.1.4 Toe clearance
-
B. Regulatory Flexibility Act
Summary of the need for, and objectives of, the 2016 Non-Rail Vehicle Guidelines. ...
-
T207.1 General
Non-rail vehicles shall provide handrails, stanchions, and handholds in accordance with T207. Handrails, stanchions, and handholds shall comply with T303....
-
404.1 General
ICT that transmits or converts information or communication shall not remove non-proprietary information provided for accessibility or shall restore it upon delivery....
-
Re: 1.1 Maintenance and Repair Projects
The existing sewer line is within a suite under a non-structural slab and needs to be replaced. ...
-
306.3.2 Maximum Depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (230 mm) above the finish floor or ground....
-
902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....
-
E207.2 WCAG Conformance
Non-Web software shall not be required to conform to the following four Success Criteria in WCAG 2.0: 2.4.1 Bypass Blocks; 2.4.5 Multiple Ways; 3.2.3 Consistent Navigation; and 3.2.4 Consistent...
-
Identification of Available Accessible Seating
Venues and third-party sellers must provide the same information about accessible seats as provided about non-accessible seats, using the same text and visual representations....
-
§382.43(a)(3)
(3) You must not subject TTY users to charges exceeding those that apply to non-TTY users of telephone information and reservation service....
-
§ 1194.25(j)
(j) Products which are freestanding, non-portable, and intended to be used in one location and which have operable controls shall comply with the following:...
-
T207.4.1. Small vehicles
Handrails, stanchions, or handholds shall be provided within small non-rail vehicles in a configuration that permits onboard circulation and assistance with seating and standing....
-
T215.2.3 Doorways
Doorways that provide a means of accessible boarding and alighting shall be identified on the exterior of the non-rail vehicle by the International Symbol of Accessibility complying with...
-
B. Chapter 1: Application and Administration
Chapter 1 contains provisions on the application and administration of the 2016 Non-Rail Vehicle Guidelines. Only the definitions section in this chapter received comments....
-
307.3 Post-Mounted Objects
Free-standing objects mounted on posts or pylons shall overhang circulation paths 12 inches (305 mm) maximum when located 27 inches (685 mm) minimum and 80 inches (2030 mm) maximum above the finish...
-
I. Public Toilet Rooms
Rooms: (1) In all public and common use toilet rooms throughout the Hotel and the Tower, Defendants will provide at least one lavatory with a counter-top that is 34 inches above the finish...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3....
-
Printed materials
• Printed programs, advertisements, and brochures with large, clear type, in high contrast colors on solid backgrounds on satin- or matte-finish paper are more legible for people with...
-
R405.3.1 General
Space under an element between 230 mm (9 in) and 685 mm (2.25 ft) above the finish surface shall be considered knee clearance and shall comply with R405.3....
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3....
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3. ...
-
4.34.6.5(5)
The finished flooring shall extend under the counter to the wall....