Section 307.4 covers the current ADA Standards for vertical clearance.
Search Results "Minimum Dimension"
-
Vertical Clearance: ADA Standard Section 307.4
-
Submerged Depth: ADA Standard Section 1009.3.2
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (760 mm) maximum below the stationary water level....
-
11B-604.7.1 Dispensers
Toilet paper dispensers shall comply with Section 11B-309.4 and shall be 7 inches (178 mm) minimum and 9 inches (229 mm) maximum in front of the water closet measured to the centerline of...
-
11B-307.4 Vertical clearance
Vertical clearance shall be 80 inches (2032 mm) high minimum. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2032 mm) high....
-
11B-604.7.1 Dispensers
Toilet paper dispensers shall comply with Section 11B-309.4 and shall be 7 inches (178 mm) minimum and 9 inches (229 mm) maximum in front of the water closet measured to the centerline of...
-
11B-307.4 Vertical clearance
Vertical clearance shall be 80 inches (2032 mm) high minimum. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2032 mm) high....
-
The ADA Standards for Accessible Design (the ADA Standards)
The ADA Standards identify what features need to be accessible, set forth the number of those features that need to be made accessible, and then provide the specific measurements, dimensions...
-
Sections 4.8.5 and 4.9.4
An exception permits the distance between the horizontal projections and the bottom of the gripping surface to be reduced by 1/8 inch for each ½ inch of additional handrail perimeter dimension...
-
Water Closet Centerline and Seat Height
Water closets can be located so that this dimension is met on either the left side or the right side of the fixture....
-
611 Washing Machines and Clothes Dryers
This dimension stems from specifications for obstructed side reaches (308.3)....
-
13. Do the provisions for openings in floor and ground surfaces in Section 302.3 apply to walking surfaces in play areas?
If gratings or openings have elongated openings, they must be placed so the long dimension is perpendicular to the dominant direction of travel....
-
COST OF EQUIPMENT
COST OF EQUIPMENT Table 1: Cost of Equipment Configurations Dimensions Price Range Average Price Price Increase Configuration #1:...
-
Supporting Documents for the Medical Diagnostic Equipment Accessibility Standards Advisory Committee Report
Subcommittee Report - Imaging Equipment Subcommittee Report - Mammography Subcommittee Report - Stretchers Subcommittee Report - Weight Scales IDeA Center Memo – Transfer Surface Dimensions...
-
T302.3 Openings
Elongated openings shall be placed so that the long dimension is perpendicular to the dominant direction of travel. EXCEPTIONS: 1....
-
Shape and Diameter
The 1½ inch clearance between walls and handrails is an absolute dimension; it provides knuckle clearance while preventing entrapment of the arm for people who lean on rails with their forearm...
-
4.10.4 HALL LANTERNS
(2) Visual elements shall be at least 2-1/2 in (64 mm) in the smallest dimension. (3) Signals shall be visible from the vicinity of the hall call button....
-
11B-812.10.4 Location
Where the long dimension of a vehicle space is parallel to the vehicular way, the EV charger shall be adjacent to, and 48 inches (1219 mm) maximum from the head end or foot end of the vehicle...
-
Grab bars
The outside diameter dimension range for circular cross-section grab bars are between 1.25 and 2 inches. A 1.5 inch diameter was chosen for the study....
-
A4.32.4 Height of Tables or Counters
34 865 Seated in a 16 in (405 mm) high chair: Manual work 26 660 27 685 Light, detailed work 28 710 31 785 1All dimensions...
-
A4.32.4 HEIGHT OF WORK SURFACES
Seated in a 16-in (405-mm)-high chair: Manual work 26 660 27 685 Light, detailed work 28 710 31 785 * All dimensions...
-
Clear Space Evaluation
The space needed by the study participants was compared to a turning space dimension as described in the ADA-ABA standards (60x60 inch space)....
-
4.3.5.4 360-degree Turn
Dimensions for 360-degree turning spaces are used to determine the minimum spaces needed for turning around in spaces with only one point of entry....
-
Seat Width: ADA Standard Section 1009.2.5
The seat shall be 16 inches (405 mm) wide minimum....
-
11B-411.2.1.2.4.3 Duration
Elevator assignment characters shall be displayed for a minimum of 5 seconds....