It has consistently been the Department's position that title II requirements apply to correctional facilities used by State or local government entities, irrespective of whether the public...
Search Results "Facility Use"
-
Facilities operated through contractual, licensing, or other arrangements with other public entities or private entities. (Section-by-Section Analysis)
-
Turning Space: ADA Standard Section 1010.1
A circular turning space 60 inches (1525 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
11B-1010.1 Turning space
A circular turning space 60 inches (1524 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
11B-1010.1 Turning space
A circular turning space 60 inches (1524 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
Corbin Russwin Inc. HPSK Push Pull Paddle Trim
Multiple mounting orientations, hands free operation and a sleek, aesthetic form, make the push/pull paddle trim ideal for use in healthcare facilities and educational facilities....
-
11B-206.2.8 Employee work areas
Common use circulation paths within employee work areas shall comply with Section 11B-402. Exceptions: 1. Reserved. [2010 ADA Standards] 1....
-
11B-206.2.8 Employee work areas
Common use circulation paths within employee work areas shall comply with Section 11B-402. Exceptions: 1. Reserved. [2010 ADA Standards] 1....
-
68.20(e) Railroad Vehicles
(e) Commercial facilities are subject to the Act and compliance with TAS if they are intended for non-residential use by a private entity and if their operations will affect commerce....
-
‘‘Commercial facilities’’ (Preamble, Section-by-Section Analysis)
‘‘Commercial facilities’’ are those facilities that are intended for nonresidential use by a private entity and whose operations affect commerce....
-
§ 37.9(c)(2)
(2) Existing buildings and facilities that are not altered after November 29, 2006, and which comply with the former Appendix A to this part, are not required to be retrofitted to comply...
-
11B-408.2.3 Hoistway signs
Signs at elevator hoistways shall comply with Section 11B-407.2.3.1.
-
11B-408.4.6 Car controls
Elevator car controls shall comply with Section 11B-407.4.6. Control panels shall be centered on a side wall.
-
11B-408.3.2.2 Duration
Power-operated swinging doors shall remain open for 20 seconds minimum when activated.
-
11B-408.2.2 Hall signals
Hall signals shall comply with Section 11B-407.2.2.
-
11B-604.9.1 Location
The water closet shall be located with a wall or partition to the rear and to one side. The centerline of the water closet shall be 12 inches (305 mm) minimum and 18 inches (457 mm)...
-
11B-408.3.2.1 Power operation
Swinging doors shall be power-operated and shall comply with ANSI/BHMA A156.19.
-
11B-408.3.2.1 Power operation
Swinging doors shall be power-operated and shall comply with ANSI/BHMA A156.19.
-
11B-408.2.2 Hall signals
Hall signals shall comply with Section 11B-407.2.2.
-
11B-408.3.2.2 Duration
Power-operated swinging doors shall remain open for 20 seconds minimum when activated.
-
11B-408.4.6 Car controls
Elevator car controls shall comply with Section 11B-407.4.6. Control panels shall be centered on a side wall.
-
11B-408.2.3 Hoistway signs
Signs at elevator hoistways shall comply with Section 11B-407.2.3.1.
-
11B-604.9.1 Location
The water closet shall be located with a wall or partition to the rear and to one side. The centerline of the water closet shall be 12 inches (305 mm) minimum and 18 inches (457 mm)...
-
11B-235 Recreational boating facilities
[See subsections ...]
-
11B-235 Recreational boating facilities
[See subsections ...]
