Controls shall comply with 4.27.4. Unit controls shall be front mounted or side mounted near the front edge.
Search Results "Water Play Component"
Commonly Searched Documents
-
4.15.4 CONTROLS
-
5.3.3.1 Height
The total height of the toilet seat on the riser for a pit toilet shall be between 17 inches (430 mm) and 19 inches (485 mm) above the floor or ground surface.
-
Length
Length. Whereas none of the respondents specifically addressed the issue of grab bar length, drawings submitted clearly indicate that many of the alternate swing away grab bars were...
-
Offset Flange
For floor mounted water closets, we have suggested the use of an offset waste flange to shift the centerline. ...
-
Pool Lifts
Pool Lifts Pool lifts must be located where the water level is not deeper than 48 inches....
-
11B-609.4 Position of grab bars
shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except that at water...
-
11B-604.3.1 Size
Clearance around a water closet shall be 60 inches (1524 mm) minimum measured perpendicular from the side wall and 56 inches (1422 mm) minimum measured perpendicular from the rear wall....
-
604.5.1 Side Wall
Figure 604.5.1 Side Wall Grab Bar at Water Closets...
-
11B-602.3 Operable parts
The flow of water shall be activated by a manually operated system that is front mounted or side mounted and located within 6 inches (152 mm) of the front edge of the fountain or an automatic...
-
604.5.1 Side Wall
[ECTCR UFAS 4.17.6, Fig. 30(a), Fig. 30(d)] Figure 604.5.1 Side Wall Grab Bar at Water Closets...
-
Spout Location [4.15.3]
The trajectory of water flow must be vertically "parallel" or "nearly parallel" to the face of the unit....
-
Are all play areas required to be upgraded to the design specifications in the 2010 ADA Standards for Accessible Design?
Not all play areas must be upgraded to be accessible, but enough playgrounds must be upgraded to ensure that children with disabilities have an equal opportunity to participate....
- Whitehall Mfg. WH2142W2 Ligature-Resistant Toilet Wall Supply On-Floor Wall Waste
- Whitehall Mfg. Ligature Resistant Toilet Top Supply On-Floor
- Whitehall Mfg. WH2142T2 Ligature Resistant Toilet Top Supply On-Floor Wall Waste
-
Fixtures
Fixtures TAS 604.3.2 also allows the clear floor space and clearances required at other “fixtures” to overlap the water closet clearance....
-
TOTO Drake® Two-Piece Toilet, 1.6 GPF, ADA Compliant, Elongated Bowl
Requires the Premium User plan or above. (Login or upgrade your account!)
-
11B-204.1 General
Within play areas, protruding objects on circulation paths shall not be required to comply with Section 11B-307 provided that ground level accessible routes provide vertical clearance in...
-
Unisex (Single-Use or Family) Toilet and Unisex Bathing Rooms: ADA Standard Section 213.2.1
Section 213.2.1 covers scoping requirements in the current ADA Standards for unisex (single-use or family) toilet and unisex bathing rooms.
- Murdock Manufacturing Wall Hung Toilet, Rear Mount
- Murdock Manufacturing Floor Mount, Wall Outlet Toilet
- Murdock Manufacturing Compact Wall Hung Toilet, Wall Supply
- Big John Original Toilet Seat with Cover White 1W