Transfer steps shall have level surfaces 14 inches (355 mm) deep minimum and 24 inches (610 mm) wide minimum....
Search Results "Transfer Device (Amusement Rides)"
Commonly Searched Documents
-
1008.3.2.1 Size
-
Paragraph (b) (Advisory Guidance)
Paragraph (b) Connection Point for External Audio Processing Devices 1....
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
11B-1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface....
-
11B-1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface....
-
11B-1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface....
-
5.1.4 Transfer Surface Height Measurement for M301 and M302
5.1.4 Transfer Surface Height Measurement for M301 and M302 The Committee recommends capturing the transfer surface height at the highest point of the seat in an uncompressed state, inclusive...
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
Connected Elevated Components
Connected Elevated Components When transfer systems are used, an elevated play component may connect to other elevated play components, providing an innovative, accessible route....
-
11B-220 Automatic teller machines, fare machines and point-of-sale devices
[2010 ADA Standards] 220 Automatic Teller Machines and Fare Machines ETA Editor’s Note The CBC includes point-of-sale devices. Therefore, the CBC is more inclusive....
-
§ 36.303(g)(1)(ii) Audio description
Audio description generally requires the use of an audio description device for delivery to a patron....
-
11B-707.1 General
Automatic teller machines, fare machines and point-of-sale devices shall comply with Section 11B-707. [2010 ADAS] 707.1 General. ...
-
5.5.1 Armrest Provision for M302
If provided, armrests cannot interfere with transfer supports during the transfer....
-
11B-608.5.1 Transfer type shower compartments
In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1219 mm...
-
5.2.3 Transfer Surface Measurement Recommendation for M301 and M302
5.2.3 Transfer Surface Measurement Recommendation for M301 and M302 Description: The transfer surface size standard has two components: width and depth....
-
11B-707.1 General
Automatic teller machines, fare machines and point-of-sale devices shall comply with Section 11B-707. [2010 ADAS] 707.1 General....
-
11B-707.1 General
Automatic teller machines, fare machines and point-of-sale devices shall comply with Section 11B-707. [2010 ADA Standards] 707.1 General....
-
1f
Is there a horizontal grab bar on the wall alongside the shower seat (but not behind the shower seat) for stabilization and to aid in transfer from a wheelchair to the folding shower seat...
-
(4) Adjustability: Method of Measurement
used in the seated position, be taken from the floor to the top of the transfer surface (proposed M301.2.1 and M302.2.1, respectively)....
-
National Network of ADA Centers
of a low height transfer number....
- eone Bradley Classic Timepiece
-
4.1 Wheeled Mobility Device Dimensions
4.1 Wheeled Mobility Device Dimensions Figure 1 and Table 2 show the standards from the four countries and the variables they include on wheeled mobility device sizes....
-
M301.2.3.1 End Transfer Surface
End transfer surfaces shall be 28 inches (710 mm) wide minimum and 17 inches (430 mm) long minimum. ...