Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
Search Results "Side Transfer Surface"
Commonly Searched Documents
-
11B-410.2 Floor surfaces
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
-
Stable
A surface is not permanently affected by expected weather conditions and can sustain normal wear and tear from the expected use(s) of the area, between planned maintenance....
-
1008.3.1.1 Size
Transfer platforms shall have level surfaces 14 inches (355 mm) deep minimum and 24 inches (610 mm) wide minimum....
-
1008.3.2.1 Size
Transfer steps shall have level surfaces 14 inches (355 mm) deep minimum and 24 inches (610 mm) wide minimum....
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
11B-608.5.1 Transfer type shower compartments
In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1219 mm...
-
M304.2 Standing Surface
The surface on which the patient stands shall be slip resistant....
-
Side reach (Section-by-Section Analysis)
Side reach. The 1991 Standards at section 4.2.6 establish a maximum side-reach height of 54 inches. The 2010 Standards at section 308.3.1 reduce that maximum height to 48 inches....
-
Side reach (Section-by-Section Analysis)
Side reach. The 1991 Standards at section 4.2.6 establish a maximum side-reach height of 54 inches. The 2010 Standards at section 308.3 reduce that maximum height to 48 inches....
-
M304.2 Standing Surface
Equipment surfaces on which patients stand must comply with M304.2...
- TechniSoil G3® Pathway Liquid Polymer Stabilizer
-
INTRODUCTION
, the surface returns to its original condition; Firmness – the degree of surface resistance to deformation, especially by indentation or the movement of objects; and Slip-resistance...
- Figure 404.2.4.1(k) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Push Side with Closer – Drawing from the U.S. Access Board
-
1011.5.1 Fire Building Surfaces
Fire building surfaces shall be 9 inches (230 mm) minimum above the ground....
-
1011.5.1 Fire Building Surfaces
Fire building surfaces shall be 9 inches (230 mm) minimum above the ground....
-
409.4.2 Floor Surfaces
409.4.2 Floor Surfaces. Floor surfaces in elevator cars shall comply with 302 and 303....
-
11B-902 DINING SURFACES AND WORK SURFACES
[See subsections ...]
-
11B-226 DINING SURFACES AND WORK SURFACES
[See subsections ...]
-
11B-226 Dining surfaces and work surfaces.
[See subsections ...]
-
11B-902 Dining surfaces and work surfaces
[See subsections ...]
-
11B-226 Dining surfaces and work surfaces
[See subsections ...]