11. Is the gap between the wall and the inside face of each grab bar exactly 1 1/2" to accommodate persons with disabilities who rest their forearms on the bars for stabilization so...
Search Results "Shower Seat"
Filters
Commonly Searched Documents
-
11. Gap
-
6.1
6.1 Wheelchair spaces shall have at least one fixed companion fixed seat adjacent to each wheelchair space....
-
5.3.3.3 Location Where Walls Not Provided
Where walls or partitions are not provided, the seat shall be positioned in a corner of the clear floor or ground space required by 5.3.2 for a left-hand or right-hand approach....
-
General: ADA Standard Section 609.1
Section 609.1 of the ADA Standards covers information in the current ADA Standards for grab bars in toilet facilities and bathing facilities.
-
Plumbing Fixtures and Accessories: ADA Standard Section 213.3
Section 213.3 covers scoping requirements in the current ADA Standards for plumbing fixtures and accessories.
-
11B-609.1 General
Grab bars in toilet facilities and bathing facilities shall comply with Section 11B-609.
-
11B-213.3 Plumbing fixtures and accessories
Plumbing fixtures and accessories provided in a toilet room or bathing room required to comply with Section 11B-213.2 shall comply with Section 11B-213.3. Advisory 11B-213.3...
-
§ 38.95(d) Mobility aid seating location
(d) Mobility aid seating location. Spaces for persons who wish to remain in their wheelchairs or mobility aids shall have a minimum clear floor space 48 inches by 30 inches....
-
Section 36.308 Seating in Assembly Areas (Preamble, Section-by-Section Analysis)
Section 36.308 Seating in Assembly Areas....
-
5.2.2 Transfer Surface Size for Equipment Used by Patients in Seated Position
5.2.2 Transfer Surface Size for Equipment Used by Patients in Seated Position....
-
21. BRAND STANDARDS, QUALITY ASSURANCE INSPECTIONS
Standards that Brand Hotels constructed for first occupancy after January 26, 1993 must have the required number of accessible rooms and the required number of accessible rooms with roll-in showers...
-
T213.1 General
Seats on non-rail vehicles shall comply with T213....
-
§ 38.105 Priority seating signs
[See subsections ...]
-
Scoping [4.1.3(18)]
Scoping [4.1.3(18)] Access is required to at least 5% of fixed or built-in seating and tables....
-
M17
Is the top of the toilet seat 17 to 19 inches above the floor? [ADA Standards § 4.16.3] Yes No...
-
H19
Is the top of the toilet seat 17 inches to 19 inches above the floor? [ADA Standards § 4.16.3] Yes No...
-
Why Moen Commercial Products?
At Moen Commercial, we do our job before you do yours. We listen, watch and learn what drives our customers' businesses and create real-world solutions and products that deliver and...
-
Section 36.308 Seating in Assembly Areas (Section-By-Section Analysis and Response to Comments)
In order to facilitate seating of wheelchair users who wish to transfer to existing seating, paragraph (a)(1) of the final rule adds a requirement that, to the extent readily achievable,...
-
1134A.6, Item 3
A clear maneuvering space at least 30 inches in width by 48 inches in length (762 mm by 1219 mm) shall be located outside the shower, flush and parallel to the control wall....
-
1134A.6, Item 3
A clear maneuvering space at least 30 inches in width by 48 inches in length (762 mm by 1219 mm) shall be located outside the shower, flush and parallel to the control wall....
-
H28
Is the surface of the toilet seat in this 36-inch-wide stall 17 to 19 inches above the floor? [ADA Standards §§ 4.16.3; 4.22.4] Yes No...
-
Figure 608.3.1 Grab Bar for Transfer Type Showers – Drawing from the U.S. Access Board
-
Behavioral Safety Products #SV230 Ligature Resistant Shower Valve, Handle, & Escutcheon Plate
BSP has designed and developed this suicide resistant shower valve, handle & escutcheon plate expressly to prevent injury by ligature....
-
Bradley 1-Stall Seat Cover/Tissue Dispenser 5922
Model 5922, 5922-10, 5922-11, 5922-69 Model 5922 recessed (shown, clearance for grab bar) BradEX Model 5922-10 semi-recessed (recesses 2-3/4"; projects 1-1/2" -...
