you must provide a particular seating accommodation, if requested....
Search Results "Patient Seated in Wheelchair"
-
Four Specific Situations in which a Seating Accommodation Must be Provided
-
1009.2.5 Seat Width
1009.2.5 Seat Width. The seat shall be 16 inches (405 mm) wide minimum....
-
11B-232.4 Medical care facilities
Patient bedrooms or cells required to comply with Section 11B-223 shall be provided in addition to any medical isolation cells required to comply with Section 11B-232.3....
-
11B-232.4 Medical care facilities
Patient bedrooms or cells required to comply with Section 11B-223 shall be provided in addition to any medical isolation cells required to comply with Section 11B-232.3....
-
1.15 Stadium-style seating, stadium section, or stadium seating
1.15 "Stadium-style seating," "stadium section," or "stadium seating" shall mean and refer to that portion of the auditorium where the seats are affixed to risers....
-
M304 Diagnostic Equipment Used by Patients in Standing Position
[See subsections ...]
-
M304 Diagnostic Equipment Used by Patients in Standing Position
[See subsections ...]
-
M305.2.8 Fittings
Transfer supports shall not rotate within their fittings when in place for transfer.
-
M305.2.7 Clearance
Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum.
-
M305.2.7 Clearance (Section-by-Section Analysis)
In the MDE NPRM, the Access Board did not provide any specific requirements for clearances around the transfer support. However, in the preamble to the MDE NPRM the Access Board...
-
Height – M301.2.1 & M302.2.1
Height – M301.2.1 & M302.2.1 The subcommittee discussed the increments for adjustability and decided that infinite adjustability is the appropriate standard as both electronic...
-
M305.2.3 Fittings
Transfer supports shall not rotate within their fittings.
-
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces....
-
Identification: ADA Standard Section 802.4.2
Each designated aisle seat shall be identified by a sign or marker. Advisory 802.4.2 Identification....
-
Amusement Ride Seat
Amusement Ride Seat. A seat that is built-in or mechanically fastened to an amusement ride intended to be occupied by one or more passengers. ...
-
1.16 Traditional, sloped-floor or traditional seating
1.16 "Traditional, sloped-floor" or "traditional seating" shall mean and refer to the section of an auditorium in which the seats are not affixed on risers, but are instead affixed to...
-
AMUSEMENT RIDE SEAT
AMUSEMENT RIDE SEAT. [DSA-AC] A seat that is built-in or mechanically fastened to an amusement ride intended to be occupied by one or more passengers....
-
Guldmann Mobile Lifter GL5: Lifting from bed to wheelchair
For more information please go to: www.guldmann.com
-
UFAS vs. ADAAG Comparison - Assembly Seating
UFAS vs ADAAG - Assembly Seating Click here to view/download pdf version (36 KB) Capacity of Seating & (in) Assembly Areas Combined Standards...
-
11B-802.1.4 Approach
Wheelchair spaces shall adjoin accessible routes. Accessible routes shall not overlap wheelchair spaces. Advisory 11B-802.1.4 Approach....
-
11B-802.1.4 Approach
Wheelchair spaces shall adjoin accessible routes. Accessible routes shall not overlap wheelchair spaces. Advisory 11B-802.1.4 Approach....
-
Approach: ADA Standard Section 802.1.4
Wheelchair spaces shall adjoin accessible routes. Accessible routes shall not overlap wheelchair spaces. , , [S.H. Fig. 46(b)] Advisory 802.1.4 Approach....
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
Gamco Reversible Hand Folding Shower Seat ADA, Ivory Phenolic - 5181
Seat is constructed of durable, water-resistant, ivory-colored 1/2" (13mm) thick solid phenolic. Reversible for left- or right-hand field installation....
