Section 407.3.4 covers the current ADA Standards for door and signal timing of elevator reopening devices.
Search Results "Lavatory Centerline"
Commonly Searched Documents
-
Door and Signal Timing: ADA Standard Section 407.3.4
-
Dispensers: ADA Standard Section 604.7
Section 604.7 covers the current ADA Standards for toilet paper dispensers.
-
11B-407.3.4 Door and signal timing
and D equals the distance (in feet or millimeters) from the point in the lobby or corridor 60 inches (1524 mm) directly in front of the farthest call button controlling that car to the centerline...
-
Chapter 6: Plumbing Elements and Facilities
Chapter 6 provides criteria for drinking fountains (602), toilet and bathing rooms (603), water closets and toilet compartments (604), urinals (605), lavatories and sinks (606), bathtubs...
-
Single-User Toilet Rooms: No Side Transfer Space
Single-User Toilet Rooms: No Side Transfer Space On single plumbing walls, lavatories can overlap water closet clear floor space although this precludes side transfers....
-
4. ABSOLUTE DIMENSIONS
For instance, consider the requirement that water closets (toilets) be an absolute 18" from the adjacent wall to the centerline....
-
604.8.1.7 Water closet
Advisory 604.8.1.6 Lavatory and 604.8.1.7 Water Closet....
-
11B-607.5 Controls
Controls shall be between the bathtub rim and grab bar, and between the open side of the bathtub and the centerline of the width of the bathtub....
-
POWDER ROOM
A room containing a water closet (toilet) and a lavatory, and which is not defined as a bathroom....
-
M18
Is the flush valve located on the side adjacent to the lavatory? [ADA Standards § 4.16.5] Yes No...
-
§382.111(d)
(d) Assistance to a semi-ambulatory person in moving to and from the lavatory, not involving lifting or carrying the person; or...
-
1115B.4.1, Item 1
Therefore, existing water closets permitted and/or installed when those regulations were applicable with their centerlines located nominally more than 18 inches from the side wall should...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured from the centerline...
-
1133A.2 Clear floor space
The centerline of the 30-inch (762 mm) by 48-inch (1219 mm) clear floor space provided for parallel or forward approach shall be aligned with the centerline of the work space, appliance...
-
607.5 Controls
Controls shall be between the bathtub rim and grab bar, and between the open side of the bathtub and the centerline of the width of the bathtub....
-
§382.111(c)
(c) If there is an on-board wheelchair on the aircraft, assistance with the use of the on-board wheelchair to enable the person to move to and from a lavatory;...
-
§382.27(c)(7)
(7) Provision of an on-board wheelchair on an aircraft with more than 60 seats that does not have an accessible lavatory....
-
11B-809.9.7 Exposed pipes and surfaces
Exposed water supply and drain pipes under sinks and lavatories shall comply with Section 11B-606.5....
-
11B-608.2.2.1 Clearance
[2010 ADA Standards] EXCEPTION: A lavatory complying with 606 shall be permitted on one 30 inch (760 mm) wide minimum side of the clearance provided that it is not on the side of the...
-
11B-607.5 Controls
Controls shall be between the bathtub rim and grab bar, and between the open side of the bathtub and the centerline of the width of the bathtub....
-
§382.63(a)(2)
(2) The accessible lavatory must afford privacy to persons using the on-board wheelchair equivalent to that afforded ambulatory users....
-
607.5 Controls
Controls shall be between the bathtub rim and grab bar, and between the open side of the bathtub and the centerline of the width of the bathtub....
-
11B-604.7 Dispensers
Toilet paper dispensers shall comply with Section 11B-309.4 _|Operation|_ and shall be 7 inches (178 mm) minimum and 9 inches (229 mm) maximum in front of the water closet measured to the centerline...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured from the centerline...