Where load and unload areas have more than one loading or unloading position, at least one loading and unloading position shall be on an accessible route....
Search Results "Firing Position"
Commonly Searched Documents
-
11B-206.2.9.1 Load and unload areas
-
711.3.3 Ducts and air transfer openings
Penetrations of fire-resistance-rated walls by ducts and air transfer openings that are not protected with fire dampers shall comply with this section....
-
Footrests and Armrests: ADA Standard Section 1009.2.6
If provided, the armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised (load) position....
-
11B-404.2.7 Door and gate hardware
Where sliding doors are in the fully open position, operating hardware shall be exposed and usable from both sides....
-
704.10 Vertical exposure
protectives shall be provided in every opening that is less than 15 feet (4572 mm) vertically above the roof of an adjoining building or adjacent structure that is within a horizontal fire...
-
4.3.11.1(3)
(3) A portion of a one-hour fire-resistive corridor (complying with local requirements for fire-resistive construction and for openings) located immediately adjacent to an exit enclosure...
-
Horizontal Exits [IBC §1021 (2003), §1005.3.5 (2000)]
A horizontal exit compartmentalizes a building allowing occupants to exit the area containing the origin of a fire into another portion of the building that is protected by fire-resistance-rated...
-
1.1.4 Appendices
with Health and Safety Code Section 18901 et. seq. for Building Standards Law, Health and Safety Code Section 17950 for State Housing Law and Health and Safety Code Section 13869.7 for Fire...
-
711.4.2 Membrane penetrations
Penetrations of membranes that are part of a fire-resistance-rated horizontal assembly shall comply with Section 711.4.1.1 or 711.4.1.2....
-
704.8.2 First story
In occupancies other than Group H, unlimited unprotected openings are permitted in the first story of exterior walls facing a street that have a fire separation distance of greater than...
-
Exit Doors: ADA Standard Section 216.4.1
Section 216.4.1 covers scoping requirements in the current ADA Standards for signs at exit doors.
-
11B-806.2.3 Sleeping areas
The clear space shall be positioned for parallel approach to the side of the bed. [2010 ADA Standards] 806.2.3 Sleeping Areas....
-
C. Communication Features
Yes __ No __ N/A __ Comments: ________________________________________ Visual notification device for door knocks and phone calls (Cannot be same strobe as the fire alarm strobe unit)...
- Stanley QRM 100 Series Grade 1 Extra Heavy Duty Exit Devices
-
1009.8.1 System requirements
Two-way communication systems shall provide communication between each required location and the fire command center or a central control point location and a central control point is not...
-
Attachment A: Disability-Related Issues for Emergency Plan Coordinators
department that includes: Fire Department reviewing the plan at least once a year, Fire Department receiving a copy of a current log containing names...
-
711.3.2 Membrane penetrations
Where walls and partitions are required to have a minimum 1-hour fire-resistance rating, recessed fixtures shall be installed such that the required fire resistance will not be reduced....
-
11B-803.6 Mirrors
Mirrors shall be full length with a reflective surface 18 inches (457 mm) wide minimum by 54 inches (1372 mm) high minimum and shall be mounted in a position affording a view to a person...
-
REPAIR
The definition is clear that repair is limited to work on an item or part and does not apply to a renovation, rehabilitation or renovation to an existing building in the event of fire or...
-
Sleeping Areas: ADA Standard Section 806.2.3
The clear floor space shall be positioned for parallel approach to the side of the bed....
-
Attachment G: Modifications to Newly Constructed Facilities
Attachment G: Modifications to Newly Constructed Facilities
-
TABLE OF CONTENTS
210 Stairways 211 Drinking Fountains 212 Kitchens, Kitchenettes, and Sinks 213 Toilet Facilities and Bathing Facilities 214 Washing Machines and Clothes Dryers 215 Fire...
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall provide a clear, unobstructed opening of 32 inches (813 mm) with one leaf positioned at an angle of 90 degrees from...
-
11B-216.4.1 Exit doors
An exit passageway is a horizontal exit component that is separated from the interior spaces of the building by fire-resistance-rated construction and that leads to the exit discharge or...