4 contains technical requirements for accessible routes (402) and the various components of such routes, including walking surfaces (403), doors, doorways and gates (404), ramps (405), curb...
Search Results "Curb Cut"
Filters
Commonly Searched Documents
-
Chapter 4: Accessible Routes
-
303.3 Beveled
Changes in level exceeding 1/2 inch (13 mm) must comply with 405 (Ramps) or 406 (Curb Ramps)....
-
Components (R302.2) (Section-by-Section Analysis)
Curb ramps and blended transitions must comply with the technical requirements in R302.7 and R304. Ramps must comply with the technical requirements in R407....
-
ALTERNATIVES TO BARRIER REMOVAL
Examples of alternatives to barrier removal include, but are not limited to, the following actions -- §36.305(b)(1) Providing curb service or home delivery; §36.305(b)(2) Retrieving...
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
Protruding Objects and Outdoor Recreation Access Routes
Edge protection is a raised curb, wall, railing, or other structure that defines the edge of a travel surface and may help keep people on the travel surface....
-
308 Reach Ranges
Gas pumps are often located on curbs at least 6 inches high for safety reasons....
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
10.2.1(1)
are constructed at bus stops, bays or other areas where a lift or ramp is to be deployed, they shall have a firm, stable surface; a minimum clear length of 96 inches (measured from the curb...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-303.3 Beveled
Changes in level exceeding 1/2 inch (13 mm) must comply with Sections 11B-405 (Ramps) or 11B-406 (Curb Ramps). ◼ ...
-
American Academy of Physical Medicine and Rehabilitation (AAPM&R)
Physiatrists utilize cutting‐edge as well as time‐tested treatments to maximize function and quality of life....
-
Parking sign height measurement technique
The parking surface or the surface directly under the sign, if different (such as a curb or landscaping)? The only way for uniformity would be from the parking surface, right? ...
-
1005.3 Edge Protection
In such a design, curbs or barriers are not required....
-
1005.3 Edge Protection
In such a design, curbs or barriers are not required....
-
Section 2. Accessible route
Exterior accessible routes may include parking access aisles, curb ramps, walks, ramps and lifts....
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
1005.3 Edge Protection
In such a design, curbs or barriers are not required....
-
§100.201 Accessible route
Exterior accessible routes may include parking access aisles, curb ramps, walks, ramps, and lifts....
-
Inpro ENDURANT® Shower Receptors
bio-resin blend containing rapidly renewable and recycled material Select custom entryway options including ADA-compliant beveled transitional edge, ADA-compliant flush roll in or curb...
-
Gamco Partition Mounted Sanitary Napkin Disposal - ND-6
Mounts in toilet partition 1/2" to 1-1/4" (13 x 32mm) thick, centered through a cutout specially ordered from partition manufacturer or field cut....
-
11B-1005.3 Edge protection
In such a design, curbs or barriers are not required....
