The fixture, without the optional -HSBJ hinged seat) shall withstand loads up to 2,000 pounds (907.1 kg) with no measurable deflections....
Search Results "Built-In Seating"
Filters
Commonly Searched Documents
-
Whitehall Mfg. WH2125A On-Floor Bariatric Stainless Steel Toilet
-
Caroma® USA Invisi Series II Walvit Wall Hung Elongated Water Closet
For in wall applications with raised height cisterns an extension kit is provided with the kit Seat: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Easy...
-
Section 35.151(g) Assembly areas (Section-by-Section Analysis)
These platforms cover groups of conventional seats and are used to provide groups of wheelchair seats and companion seats....
-
Bobrick B-3091 ClassicSeries® Recessed-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
Toilet seat-cover dispenser holds 500 paper covers. Removable waste disposal for servicing. Capacity: 0.4-gal. (1.5-L)....
-
Bobrick B-3092 ClassicSeries® Recessed-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
Toilet seat-cover dispenser holds 500 paper covers. Removable waste disposal for servicing. Capacity: 0.4-gal. (1.5-L)....
-
11B-221.2.4 Temporary structures
Exception: When an entire seating section is placed on temporary platforms or other movable structures in an area where fixed seating is not provided, in order to increase seating for an...
-
11B-221.2.4 Temporary structures
Exception: When an entire seating section is placed on temporary platforms or other movable structures in an area where fixed seating is not provided, in order to increase seating for an...
-
11B-221.2.4 Temporary structures
Exception: When an entire seating section is placed on temporary platforms or other movable structures in an area where fixed seating is not provided, in order to increase seating for an...
-
608.5.2 Standard Roll-In Type Shower Compartments
Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from...
-
§ 38.107(b)
(b) Restrooms required to be accessible shall be in close proximity to at least one seating location for persons using mobility aids and shall be connected to such a space by an unobstructed...
-
11B-608.5.2 Standard roll-in type shower compartments
the seat wall; and shall be located above the grab bar, but no higher than 48 inches (1219 mm) above the shower floor...
-
11B-608.5.2 Standard roll-in type shower compartments
the seat wall; and shall be located above the grab bar, but no higher than 48 inches (1219 mm) above the shower floor...
-
Willoughby Industries ETW-1445-BS-HC Toilet for 45-degree Chase Wall
Standard toilet shall include: Elongated toilet bowl with contoured seat - Integral crevice-free self-draining flushing rim with positive after fill - Fully enclosed 2 1/2” O.D. trap...
-
8.2 READING AND STUDY AREAS
At least 5 percent or a minimum of one of each element of fixed seating, tables, or study carrels shall comply with 4.2 and 4.32....
-
M303.2 Wheelchair Spaces
A wheelchair space can be used to accommodate patients who use wheelchairs as well as other mobility devices and seating....
-
M302.1 General (Section-by-Section Analysis)
The MDE NPRM proposed that all diagnostic equipment used by patients in a seated position must comply with the technical requirements of proposed section M302....
-
8.2 Reading and Study Areas
At least 5 percent or a minimum of one of each element of fixed seating, tables, or study carrels shall comply with 4.2 and 4.32....
-
608.5.2 Standard Roll-In Type Shower Compartments
Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from...
-
M303.2.1 Orientation
Wheelchair spaces shall be designed so that a patient seated in a wheelchair orients in the same direction that a patient not seated in a wheelchair orients when the diagnostic equipment...
-
M303.2.1 Orientation
Wheelchair spaces shall be designed so that a patient seated in a wheelchair orients in the same direction that a patient not seated in a wheelchair orients when the diagnostic equipment...
-
11B-608.5.2 Standard roll-in type shower compartments
) minimum and 27 inches (686 mm) maximum from the seat wall; and shall be located above the grab bar, but no higher than 48 inches (1219 mm) above the shower floor...
-
§ 36.302(f)(4)
(4) Purchasing multiple tickets.
-
608.5.2 Standard Roll-In Type Shower Compartments
Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from...
-
§ 36.302(f)(6) Ticket transfer
Individuals with disabilities who hold tickets for accessible seating shall be permitted to transfer tickets to third parties under the same terms and conditions and to the same extent as...
