A turning space complying with Section 11B-304 shall be provided within saunas and steam rooms....
Search Results "Space Allowance"
Filters
Commonly Searched Documents
-
11B-612.3 Turning space
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces....
-
Turning Space: ADA Standard Section 1010.1
A circular turning space 60 inches (1525 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
4.7.9.2 Clear Floor or Ground Space
Clear floor or ground space 48 inches (1220 mm) by 30 inches (760 mm) oriented for a forward or parallel approach shall be provided for utility sinks required to meet 4.7.9....
-
T210.1 General
Non-rail vehicles shall provide wheelchair spaces in accordance with T210....
-
Landscape Forms Inc. Sort Recycling Units
Sign plates are pearl gray with black lettering and mechanically fastened to the bins, allowing plates to be updated as recycling programs evolve....
-
Boat Slip Clearance: ADA Standard Section 1003.3.1
Boat slips shall provide clear pier space 60 inches (1525 mm) wide minimum and at least as long as the boat slips....
-
11B-1003.3.1 Boat slip clearance
Boat slips shall provide clear pier space 60 inches (1524 mm) wide minimum and at least as long as the boat slips....
-
11B-226.1 General
Where dining surfaces are provided for the consumption of food or drink, at least 5 percent of the seating spaces and standing spaces at the dining surfaces shall comply with Section 11B...
-
4.1.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface slope, size, or location, the...
-
206.7.2 Wheelchair Spaces
Platform lifts shall be permitted to provide an accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of 221 and 802....
-
F206.7.2 Wheelchair Spaces
Platform lifts shall be permitted to provide an accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of F221 and 802....
-
T210.2 Large non-rail vehicles
Large non-rail vehicles shall provide at least two wheelchair spaces complying with T602....
-
T210.3 Small non-rail vehicles
Small non-rail vehicles shall provide at least one wheelchair space complying with T602....
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
above the floor or ground surface of the wheelchair space....
-
4.1.3(7)(b)
(b) Within a building or facility, at least one door at each accessible space shall comply with 4.13....
-
803 Dressing, Fitting, and Locker Rooms
Section 803.2 requires wheelchair turning space in accessible rooms....
-
Clear Deck Space
Clear Deck Space Clear deck space must be provided to enable a person to get close enough to the pool lift seat to easily transfer from a wheelchair or mobility device....
-
Parking Spaces [4.6.3]
"Universal" parking spaces can be provided instead of separate standard and van spaces; (designated van spaces are not required under this design)....
-
11B-703.2.8 Line spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height....
-
T602 Wheelchair Spaces
An exception has been added to T602.4 in the final rule that permits the space occupied by wheelchair footrests to be located under an adjacent seat, provided that the space under such seat...
-
11B-808.2 Turning space
Where provided, areas that are raised or depressed and accessed by ramps or platform lifts with entry ramps shall provide unobstructed turning space complying with Section 11B-304....
-
11B-808.2 Turning space
Where provided, areas that are raised or depressed and accessed by ramps or platform lifts with entry ramps shall provide unobstructed turning space complying with Section 11B-304....
-
11B-808.2 Turning space
Where provided, areas that are raised or depressed and accessed by ramps or platform lifts with entry ramps shall provide unobstructed turning space complying with Section 11B-304....
