At least one sleeping area shall provide a 36 inch (914 mm) by 48 inch (1219 mm) minimum clear space on both sides of a bed. The clear space shall be positioned for parallel approach...
Search Results "Mechanical Room"
Commonly Searched Documents
-
11B-806.2.3 Sleeping areas
-
11B-809.10.6.7 Shower enclosures
Doors and panels of shower enclosures shall comply with Section 11B-809.10.5.4.
-
11B-809.10.6.2 Slope
The slope of the shower floor shall be 1/2 inch (12.7 mm) per foot maximum in any direction and shall slope to a drain. The floor surfaces shall be of Carborundum, grit-faced tile or...
-
11B-809.10.5.2 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: 1. Where bathtubs are installed without surrounding walls reinforcement shall be provided for floor-mounted grab...
- ADA Sign Depot California Title 24 Unisex Restroom Door Sign Circle and Triangle - 12" x 12"
-
EXTREME WALKS
Requires the Registered User plan or above. Login!
-
Section 36.406(c) Places of Lodging (Section-by-Section Analysis)
The proposed rule, in the definitions section, clarifies that a covered "place of lodging" is a facility that provides guest rooms for sleeping for stays that are primarily short-term in...
-
General: ADA Standard Section 224.1
Section 224.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for transient lodging guest rooms.
-
Water Closet Location.
Training toilets were either located in a separate room as a unisex toilet or combined with a bathing facility, for use by staff in retraining residents in toileting skills....
-
Features of an Accessible Examination Room
Features of an Accessible Examination Room 1....
-
603.2.1 Turning Space
Turning space complying with 304 shall be provided within the room....
-
9.5.2(1)(a)
(a) The provisions of 9.5.3 and 9.1.5 shall apply to sleeping rooms and beds....
-
603.2.1 Turning Space
Turning space complying with 304 shall be provided within the room....
-
11B-809.10.6.6 Controls
Controls and operating mechanisms shall comply with Section 11B-309.4....
-
Plan 5B: 13-Foot Wide Accessible Guest Room
Plan 5B: 13-Foot Wide Accessible Guest Room This drawing shows an accessible 13-foot wide guest room with features that comply with the 2010 Standards....
-
11B-603.2.1 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
612.3 Turning Space
A turning space complying with 304 shall be provided within saunas and steam rooms....
-
612.3 Turning Space
A turning space complying with 304 shall be provided within saunas and steam rooms....
-
11B-603.2.1 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
Feature 2 - Routes to the Building Entrance
Feature 2 - Routes to the Building Entrance Accessible routes connect accessible onsite features (e.g., bus stop, parking) to the building entrance. There must be at least...
-
Producing Printed Material in Large Print
Many people with visual disabilities have some sight and can read large print. Large print material can be produced by using a photo copier or a computer where an 18-point type size...
-
On-Site Readers
Sometimes, in spite of great planning, there is last-minute material that does not get converted into alternate formats. If this happens, designate people to serve as on-site...
-
Electronic File(s) As An Alternate Format
A growing number of people who are blind or have low vision prefer to receive materials in electronic format (on computer disk, USB drive, or by email). Some people listen to the...