inches (760 mm) or longer shall support a load of 600 pounds (2665 N), placed at the centroid of the ramp distributed over an area of 26 inches by 26 inches (660 mm by 660 mm), with a safety...
Search Results "CPSI: Certified Playground Safety Inspector"
Filters
Commonly Searched Documents
-
§ 38.159(c)(1) Design load
-
§ 38.159(d)(7) Seat belt and shoulder harness
For each wheelchair or mobility aid securement device provided, a passenger seat belt and shoulder harness, complying with all applicable provisions of the Federal Motor Vehicle Safety Standards...
-
11B-217.5 Shelves for portable TTYs
Exceptions: Secured areas of detention and correctional facilities where shelves and outlets are prohibited for purposes of security or safety shall not be required to comply with...
-
TownSteel XCE9010 Cylindrical Lockdown Rigid Trim Keypad Cylindrical
It features classroom lockdown function for integration of School Safety Program....
-
TownSteel XCE9020 Cylindrial Lockdown Clutched Trim Cylindrical Keypad
It features classroom lockdown function for integration of School Safety Program....
-
TownSteel XCE9030 Cylindrical Lockdown Rigid Trim Security Cylinder Cylindrical Keypad
It features classroom lockdown function for integration of School Safety Program....
-
9.1 Overview of Legal Obligations
However, an employer may refuse to hire, or may discharge an individual who is not currently able to perform a job without posing a significant risk of substantial harm to the health or safety...
-
QUESTION: WHAT CONSIDERATIONS APPLY TO PVOs’ OBLIGATION TO PROVIDE ASSISTANCE TO PASSENGERS WITH DISABILITIES WITH RESPECT TO BOARDING AND DISEMBARKING FROM VESSELS?
Part 39 does not require transfers to or from a vessel where a transfer would be contrary to legitimate safety requirements....
-
The International Symbol of Accessibility (ISA)
s International Building Code and ICC A117.1 Standard for Accessible and Usable Buildings and Facilities, the National Fire Protection Association’s NFPA 5000 Building Construction and Safety...
-
1.2.2 Alternative materials, design and methods of construction and equipment
material, method or work offered is, for the purpose intended, at least the equivalent of that prescribed in this code in quality, strength, effectiveness, fire resistance, durability and safety...
-
Access for Persons with Disabilities to Passenger Vessels and Shore Facilities
The Impact of the Americans with Disabilities Act of 1990 FINAL REPORT, July 12, 1996 Prepared for: The Office of the Secretary of Transportation Office of Environment, Energy and Safety...
-
Department of Defense Memorandum: Adoption of the ABA and Section 504 of the Rehabilitation Act
CHAIRMAN OF THE JOINT CHIEFS OF STAFF UNDER SECRETARIES OF DEFENSE ASSISTANT SECRETARIES OF DEFENSE GENERAL COUNSEL OF THE DEPARTMENT OF DEFENSE DIRECTOR, OPERATIONAL TEST AND EVALUATION INSPECTOR...
-
§382.53(b)
(b) The information you must provide under paragraph (a) of this section includes, but is not limited to, the following: Information concerning flight safety, ticketing, flight check-in,...
-
11B-217.5 Shelves for portable TTYs
Secured areas of detention and correctional facilities where shelves and outlets are prohibited for purposes of security or safety shall not be required to comply with Section 11B-217.5....
-
T402.2 Design Load
The factor of safety for ramps and bridgeplates shall be 3 or more, based on the ultimate strength of the material....
-
217.5 Shelves for Portable TTYs
Secured areas of detention and correctional facilities where shelves and outlets are prohibited for purposes of security or safety shall not be required to comply with 217.5. 2....
-
A4.26.1 General
The grab bar clearance of 1‒1/2 in (38 mm) required in this guideline is a safety clearance to prevent injuries resulting from arms slipping through the openings....
-
Protruding Object
However, safety regulations or Forest Service construction and maintenance standards may define clear space and limit overhangs of natural protruding objects....
-
A4.26.1 GENERAL
The maximum grab bar clearance of 1-1/2 in (38 mm) required in this standard is a safety clearance to prevent injuries from arms slipping through the opening....
-
Protruding Object
However, safety regulations or Forest Service construction and maintenance standards may define clear space and limit overhangs of natural protruding objects....
-
4.10.1 GENERAL
Accessible elevators shall be on an accessible route and shall comply with 4.10 and with the American National Standard Safety Code for Elevators, Dumbwaiters, Escalators, and Moving Walks...
-
11B-217.5 Shelves for portable TTYs
Secured areas of detention and correctional facilities where shelves and outlets are prohibited for purposes of security or safety shall not be required to comply with Section 11B-217.5....
-
Yale 4700LN Series Grade 1 Cylindrical Locks
The 4700(LN) Series is certified to ANSI/BHMA Grade 1 standards and is UL fire-listed for all functions ensuring reliability and peace of mind....
-
Fixed Seating and Tables
The same requirements apply to fixed tables in outdoor areas such as picnic areas, playgrounds or patios....
