5.5(e) Making Job Applications Accessible Employers have an obligation to make reasonable accommodations to enable an applicant with a disability to apply for a job. Some of the...
Search Results "Alternate Door"
Commonly Searched Documents
-
5.5(e) Making Job Applications Accessible
-
Do all print materials need to be available in large print and Braille or are they only required upon request?
The ADA Title II regulations do not get to this level of detail. Public entities are required to “make available appropriate auxiliary aids and services where necessary to ensure...
-
4.21.5 Controls
Faucets and other controls complying with 4.27.4 shall be located as shown in Fig. 37. In shower stalls 36 in by 36 in (915 mm by 915 mm), all controls, faucets, and the shower unit...
-
4.21.5 CONTROLS
Faucets and other controls complying with 4.27.4 shall be located as shown in Fig. 37. In shower stalls 36 in by 36 in (915 mm by 915 mm), all controls, faucets, and the shower unit...
-
15(d)
(d) Within the timeframe set forth in subparagraph 15(a), HWI shall ensure that each Post-1993 Owned Hotel and Post-1993 Joint Venture Hotel has the required number of accessible...
-
Clear Width [4.13.5] and Vertical Clearance
Clear Width [4.13.5] and Vertical Clearance The clear width of the opening is measured from the face of the door in a 90 degrees open position to the opposite stop....
-
409.3.1 Power Operation
Elevator car and hoistway doors and gates shall be power operated and shall comply with ANSI/BHMA A156.19 (1997 or 2002 edition) (incorporated by reference, see "Referenced Standards" in...
-
Thresholds [§404.2.5]
These requirements apply to all types of doors required to comply, including sliding doors. Threshold Profile...
-
§ 38.107(a)(5)
Door latches and hardware shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist....
-
803 Dressing, Fitting, and Locker Rooms
In the proposed rule, an exception to this provision noted that a portion of this space (6 inches maximum) could extend under partitions or openings without doors that provide toe clearance...
- Figure 608.5.3 Alternate Roll-In Type Shower Compartment Control Location – Drawing from the U.S. Access Board
- Panda S.10 All Aluminum Lift & Slide - Pocket Door System
- S.74 Aluminum Wood Clad Folding Door System Corner Detail
- Panda S.65 Aluminum Wood Clad Multi Slide Door System
- Panda S.65 Aluminum with Aluminum Clad Multi Slide Door System
- Panda TS.60 Thermally Broken Folding Door System Video 2
- Panda TS.60 Thermally Broken Folding Door System Video 1
- Panda S.10 All Aluminum Lift & Slide - Stackable Door System
-
On-Site Readers
Sometimes, in spite of great planning, there is last-minute material that does not get converted into alternate formats....
-
End-of-Row Stalls
If an out swinging door is provided at an end-of-row stall, maneuvering space of at least 18 inches at the latch side pull side must be provided....
-
1132A.7 Type of lock or latch
The type of latch and lock required for all doors shall be in accordance with Section 1132A.8 and Chapter 10, Section 1008....
-
1132A.7 Type of lock or latch
The type of latch and lock required for all doors shall be in accordance with Section 1132A.8 and Chapter 10, Section 1008....
-
Building Entrance
At least one door at the accessible entrance must have a minimum clear width of 32 inches for a voter who uses a wheelchair or other mobility device to pass through the doorway....
-
11B-603.2.3 Door swing
11B-603.2.3 Door swing. Doors shall not swing into the clear floor space or clearance required for any fixture....