Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
Search Results "Aisle Stair"
-
502.7 Relationship to Accessible Routes
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
502.7 Relationship to Accessible Routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
11B-503.5 Vertical clearance
Vehicle pull-up spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone and from the passenger loading zone to a vehicular exit shall provide...
-
11B-503.5 Vertical clearance
Vehicle pull-up spaces, access aisles serving them, and a vehicular route from an entrance to the passenger drop-off and loading zone and from the passenger drop-off and loading zone to...
-
F216 Signs
[See subsections ...]
-
703.4.1 Height above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60...
-
11B-703 SIGNS
[See subsections ...]
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60...
-
703 Signs
Requirements for signs provide specifications for raised characters (703.2), braille characters (703.3), the height and location of signs with tactile characters (703.4), visual...
-
Mounting Height and Location
Section 703.4 covers the mounting height and location of signs with tactile characters. Such signs are to be mounted so that the tactile elements (raised characters and braille) are...
-
703 Signs
[See subsections ...]
-
216 Signs
Scoping requirements for signs cover room designations (216.2) and directional and informational signs (216.3). The guidelines also include provisions specific to certain elements...
-
1003.2.13.7
[See subsections ...]
-
VI. Interior Signs...
[See subsections ...]
-
11B-216 SIGNS
[See subsections ...]
-
Scoping [4.1.2(7), 4.1.3(16)]
Scoping [4.1.2(7), 4.1.3(16)] Specifications for signage apply according to the type of sign provided. ADAAG does not require building signage except to identify certain...
-
4.30.6 Mounting Location and Height
4.30.6 Mounting Location and Height. Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
A4.30 Signage
[See subsections ...]
-
4.1.3(16) Building Signage
(16) Building Signage:
-
4.30 Signage
[See subsections ...]
-
4.30.1* General
Signage required to be accessible by 4.1 shall comply with the applicable provisions of 4.30.