At least one grab bar complying with Section 11B-609 shall be provided on the transfer wall....
Search Results "Transfers of Privately Held Equity Interest"
Commonly Searched Documents
-
11B-1009.4.5 Grab bars
-
5.4.2 Transfer Support Length for M301 and M302
balance against while performing a transfer....
-
c. Transfer Surface Size for Diagnostic Equipment Used by Patients in the Supine, Prone, or Side-lying Position
Those commenters supporting a smaller transfer surface raised concerns about the ability to transfer with a large surface preventing the patient from reaching transfer supports on the opposite...
- Symmons Allura® Tub/Hand Shower System S-4704
- American Standard Colony Soft Diverter & Personal Trim Kit
- Speakman Versatile ADA Handheld Shower System SM-5490-ADA
-
Spas
Spas Spas must provide at least one accessible means of entry, which can be a pool lift, transfer wall, or transfer system. ...
-
The Brewer Company, LLC
The proposed rule recommended that the height of the transfer surface during patient transfer shall be 17 inches minimum and 19 inches maximum measured from the floor to the top of the transfer...
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum.
-
11B-409.2 Call buttons
Call buttons shall be ¾ inch (19.1 mm) minimum in the smallest dimension and shall comply with Section 11B-309 _|Operable Parts|_.
-
409.4.7.1 Type
A telephone and emergency signal device shall be provided in the car.
-
409.4.7.4 Cord
The telephone cord shall be 29 inches (735 mm) long minimum.
-
409.4.7.3 Compartment
If the telephone or device is in a closed compartment, the compartment door hardware shall comply with 309.
-
409.4.7.2
The telephone and emergency signaling device shall comply with 309.3 and 309.4.
-
11B-409.4.7.3 Compartment
If the telephone or device is in a closed compartment, the compartment door hardware shall comply with Section 11B-309 _|Operable Parts|_.
-
11B-409.4.7.4 Cord
The telephone cord shall be 29 inches (737 mm) long minimum.
-
11B-409.4.7.1 Type
A telephone and emergency signal device shall be provided in the car.
-
409.2 Call Buttons
Call buttons shall be ¾ inch (19 mm) minimum in the smallest dimension and shall comply with 309.
-
409.4.3 Platform to Hoistway Clearance
The clearance between the car platform and the edge of any landing sill shall be 1-½ inch (38 mm) maximum.
-
409.4.3 Platform to Hoistway Clearance
The clearance between the car platform and the edge of any landing sill shall be 1 1/2 inch (38 mm) maximum.
-
409.4.7.2 Operable Parts
The telephone and emergency signaling device shall comply with 309.3 and 309.4.
-
409.4.7.3 Compartment
If the telephone or device is in a closed compartment, the compartment door hardware shall comply with 309.
-
409.2 Call Buttons
Call buttons shall be 3/4 inch (19 mm) minimum in the smallest dimension and shall comply with 309.
-
409.4.7.4 Cord
The telephone cord shall be 29 inches (735 mm) long minimum.