Search Results "NTTAA: National Technology Transfer and Advancement Act of 1995"
- Figure 1008.3.2 Transfer Steps – Drawing from the U.S. Access Board
-
Addendum E: Comparison of participants tested at the National Disabled Veterans Winter Sports Clinic (NDVWSC) compared to the participants tested at the Human Engineering Research Laboratories and Hiram G. Andrews Center
At the time this addendum was composed, there were 31 participants enrolled in the phase 2 study at HERL (27 men and 4 women). This group of subjects was compared to all the...
-
RECOMMENDED CHANGE
RECOMMENDED CHANGE Revise the Section 5.4.11 recommendation as follows: The Committee recommends transfer supports and connections contain the strength to resist vertical forces of...
-
5.1 Transfer Surface Height Recommendations
5.1 Transfer Surface Height Recommendations Description: The transfer height is set above the finished floor surface to permit transfers form mobility devices onto the transfer surface...
-
Q15: Does the Amendments Act require the Department to revise or create new Section 504 regulations to implement the Amendments Act?
The Amendments Act does not require the Department to revise its existing Section 504 regulation or to create new regulatory provisions....
- AssistiveWare Keeble Accessible Keyboard
- Origin Instruments Corporation HeadMouse® Extreme Wireless Head Controlled Mouse
-
Regulatory Process Matters
The assessment estimates the national costs of the revisions on these facilities based on annual construction data. The national costs are summarized in Table 3....
-
§ 36.303(g)(6)(i)
(i) A public accommodation may meet its obligation to provide captioning and audio description in its movie theaters to persons with disabilities through any technology so long as that technology...
-
5.1 Transfer Surface Height
5.1 Transfer Surface Height...
-
608.5.1 Transfer Type Shower Compartments
In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1220 mm...
-
"Lead On" - Americans with Disabilities Act 23 years later
Requires the Registered User plan or above. Login!
-
1009.4.3 Wall Depth and Length
The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (405 mm) maximum....
-
11B-1009.4.3 Wall depth and length
The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (406 mm) maximum....
-
1009.4.3 Wall Depth and Length
The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (405 mm) maximum....
-
M302.2.2 Sunset
The low transfer position height, Item A of M302.2.1, shall cease to have effect on [Insert date 5 years after date of publication in the Federal Register]. [sic]...
-
What should I do if my staff do not know how to help a person with a disability transfer or know what the ADA requires my office to do?
Q What should I do if my staff do not know how to help a person with a disability transfer or know what the ADA requires my office to do?...
-
5.1.3 Transfer Surface Low Height
5.1.3 Transfer Surface Low Height. No agreement on final low height...
-
Section 1193.2 Scoping (Section-by-Section Analysis)
It stated that "[t]he issue of accessibility must relate to the whole universe of technology....
-
Products and services covered under Section 255
Products and services covered under Section 255 FCC rules cover all hardware and software telephone network equipment and telecommunications equipment used in the home or office....
-
382.1 What is the purpose of this Part?
382.1 What is the purpose of this Part? The section is amended to include foreign carriers.
-
C201.1 Scope
Manufacturers shall comply with the requirements in the Revised 255 Guidelines applicable to telecommunications equipment and customer premises equipment (and related software...
-
C201.1 Scope (Section-by-Section Analysis)
C201.1 Scope (Section-by-Section Analysis) This section proposes that telecommunications equipment and customer premises equipment, as well as related software, would be required...
-
C201.1 Scope
Manufacturers of telecommunications equipment shall comply with the requirements in the 255 Guidelines applicable to such equipment when newly released, upgraded, or substantially...
