Coat hooks shall be located within one of the reach ranges specified in Section 11B-308....
Search Results "Maximum Reach Depth"
-
11B-604.8.3 Coat hooks and shelves
-
11B-604.8.3 Coat hooks and shelves
Coat hooks shall be located within one of the reach ranges specified in Section 11B-308....
-
Figure 1009.4.3 Depth and Length of Tranfer Walls – Drawing from the U.S. Access Board
-
Coat Hooks and Shelves: ADA Standard Section 803.5
Coat hooks provided within the room shall be located within one of the reach ranges specified in 308....
-
Seating [4.32.2] and Knee Clearance [4.32.3]
Seating [4.32.2] and Knee Clearance [4.32.3] Knee space at least 27 inches high is required for a depth of 19 inches....
-
11B-407.4.6.1 Location
Controls shall be located within one of the reach ranges specified in Section 11B-308....
-
11B-407.4.6.1 Location
Controls shall be located within one of the reach ranges specified in Section 11B-308....
-
Location: ADA Standard Section 407.4.6.1
Section 407.4.6.1 covers the current ADA Standards for the location of elevator car controls.
-
§ 36.302(f)(4)(iv) Maximum number of tickets patrons may purchase exceeds four
(iv) Maximum number of tickets patrons may purchase exceeds four....
-
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND OLYMPIA ENTERTAINMENT, INC. REGARDING JOE LOUIS ARENA
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND OLYMPIA ENTERTAINMENT, INC. REGARDING JOE LOUIS ARENA DJ# 202-37-197
-
M303.2.4.2.2 Height
Wheelchair spaces shall include toe clearance 9 inches (230 mm) high minimum above the floor measured to a depth of 6 inches (150 mm) maximum measured from the toe end of the wheelchair...
-
Attachment I
At each, provide and maintain a portion of the main counter which is a minimum of 36 inches in length, with a maximum height of 36 inches; or provide an auxiliary counter with a maximum...
-
Elevator Car Controls
Specifically, the ANSI standard specifies a maximum reach height of 48 inches for forward or side reaches....
-
Conclusions
Conclusions Design criteria based on the univariate analysis of abdomen depth is sufficient if all other clearance dimensions are unbounded (i.e., unrestricted) and abdomen depth is the...
-
11B-306.2.3 Minimum required depth
Where toe clearance is required at an element as part of a clear floor space, the toe clearance shall extend 17 inches (432 mm) minimum under the element. Exceptions: 1. ...
-
11B-306.2.3 Minimum required depth
Where toe clearance is required at an element as part of a clear floor space, the toe clearance shall extend 17 inches (432 mm) minimum under the element. Exceptions:...
-
11B-306.2.3 Minimum required depth
Where toe clearance is required at an element as part of a clear floor space, the toe clearance shall extend 17 inches (432 mm) minimum under the element. Exceptions: The...
-
11B-809.10.7.1 Floor space
width may be reduced to 36 inches (914 mm) minimum for lavatories, cabinets, wing walls, or privacy walls located immediately adjacent to a water closet which extend 24 inches (610 mm) maximum...
-
11B-809.10.7.1 Floor space
width may be reduced to 36 inches (914 mm) minimum for lavatories, cabinets, wing walls, or privacy walls located immediately adjacent to a water closet which extend 24 inches (610 mm) maximum...
-
2. c. i. Forward reach
[See subsections ...]
-
2. c. ii. Side reach
[See subsections ...]
-
4.2 SPACE ALLOWANCE AND REACH RANGES
[See subsections ...]
-
UFAS vs. ADAAG Comparison
function (exempt in ADAAG). 4.1.6(5) In alterations, scoping req's. for housing is reserved (deleted in ADAAG). 4.5.3 Maximum...
-
2. a. iv. Path-of-Travel (wheelchair) space allowances
Clear ground space width Maximum doorway depth and passage width Turning space: C1. Accessible route turns around an obstruction: C2....
