Locations: Restrooms Stairwells Any secondary (non-office) room Common areas Type E.3 9.5"w X 8.0"h...
Search Results "Intensive Care Patient Room"
-
Takeform Fusion Signage Miscellaneous Room Identification Type E.3
-
4. Breast Platform Adjustability
MDE Advisory Committee Report, 132, available at https://www.access-board.gov/guidelines-and-standards/health-care/about-this-rulemaking/advisory-committee-final-report. ...
-
241 and 612 Saunas and Steam Rooms
241 and 612 Saunas and Steam Rooms Section 241 of the 2010 Standards sets scoping for saunas and steam rooms and section 612 sets technical requirements including providing accessible...
-
4.35.2 Clear Floor Space
A clear floor space allowing a person using a wheelchair to make a 180-degree turn shall be provided in every accessible dressing room entered through a swinging or sliding door....
-
4.23 Bathrooms, Bathing Facilities, and Shower Rooms
[See subsections ...]
-
A4.23 Bathrooms, Bathing Facilities, and Shower Rooms
[See subsections ...]
-
A4.23 BATHROOMS, BATHING FACILITIES, AND SHOWER ROOMS
[See subsections ...]
-
4.23 BATHROOMS, BATHING FACILITIES, AND SHOWER ROOMS
[See subsections ...]
-
Attitudes
Influence the quality of care participants receive. B.2....
-
M301.3.1 Transfer Supports (Section-by-Section Analysis)
The MDE NPRM proposed to require transfer supports to be provided for use with transfer sides on diagnostic equipment used by patients in the supine, prone, or side-lying position, and that...
-
M301.3.3 Head and Back Support (Section-by-Section Analysis)
In the MDE NPRM the Access Board proposed to place the requirements for head and back support for diagnostic equipment used by patients in the supine, prone, or side-lying position in M301...
-
Transfer Supports Location and Configuration M301.3 and M302.3
Transfer Supports Location and Configuration M301.3 and M302.3 Location of the transfer supports shall be a minimum of 6 inches to a maximum of 19 inches from the top of the...
-
Gripping Surface Cross Section and Clearances M301, M302, and M305.2
Gripping Surface Cross Section and Clearances M301, M302, and M305.2 Gripping surface for transfer supports shall be free of sharp or abrasive elements and shall have rounded...
-
5.9.1 Standing Supports Recommendation In Reference To Mammography Equipment
During discussion, there was general agreement that the real use of these supports is for positioning, and thus, not meant to support the full weight of the patient or to keep a patient...
-
§ 35.151(b)(4)(i)(A)
(A) Mechanical rooms, boiler rooms, supply storage rooms, employee lounges or locker rooms, janitorial closets, entrances, and corridors are not areas containing a primary function. ...
-
§ 35.151(b)(4)(i)(A)
(A) Mechanical rooms, boiler rooms, supply storage rooms, employee lounges or locker rooms, janitorial closets, entrances, and corridors are not areas containing a primary function....
-
806.3 Guest Rooms with Communication Features
Guest rooms required to provide communication features shall comply with 806.3. Advisory 806.3 Guest Rooms with Communication Features....
-
806.3 Guest Rooms with Communication Features
Guest rooms required to provide communication features shall comply with 806.3. Advisory 806.3 Guest Rooms with Communication Features....
-
224 Transient Lodging Guest Rooms
224 Transient Lodging Guest Rooms...
-
(2) Transfer Surface Location for Diagnostic Equipment Used in the Seated Position
the patient to slide up an inclined surface to be properly positioned on the diagnostic equipment....
-
Sec.36.404(a)(1)
(1) For the purposes of this section, "professional office of a health care provider'' means a location where a person or entity regulated by a State to provide professional services related...
-
§ 36.404(a)(1)
(1) For the purposes of this section, "professional office of a health care provider" means a location where a person or entity regulated by a State to provide professional services related...
-
M301.2.3.1 End Transfer Surface
imaging equipment with bores shall be permitted to be 21 inches (535 mm) wide minimum but shall not be permitted to be less than the full width of the examination surface provided for the patient...
-
M301.2.3.2 Side Transfer Surface
imaging equipment with bores shall be permitted to be 21 inches (535 mm) wide minimum but shall not be permitted to be less than the full width of the examination surface provided for the patient...