In facilities covered by the ADA, this requirement does not apply to work surfaces used only by employees....
Search Results "Work Area Equipment"
2010 ADA Definition
Work Area Equipment: Any machine, instrument, engine, motor, pump, conveyor, or other apparatus used to perform work. As used in this document, this term shall apply only to equipment that is permanently installed or built-in in employee work areas. Work area equipment does not include passenger elevators and other accessible means of vertical transportation.
-
11B-226.1 General
-
Bus boarding and alighting areas, BRT vehicles and stops/stations
ADA standards apply to buses and bus boarding and alighting areas as well as BRT vehicles and stops/stations. (DOT ADA Regulation 49 C.F.R....
-
5.2.1.1 Transfer Surface Width
The transfer surface should be 28 inches wide minimum for equipment used by patients in a supine, side-lying, or prone position....
-
Aisle Ramps in Assembly Areas
In assembly areas, aisle ramps required to be accessible are exempt from some handrail requirements....
-
Areas of sport activity. (Section-by-Section Analysis)
Sections 206.2.2 and 206.2.12 of the 2004 ADAAG require each area of sport activity (e.g., courts and playing fields, whether indoor or outdoor) to be served by an accessible route. ...
-
Diversified Woodcrafts ADA Mobile Lab Station
Requires the Premium User plan or above. (Login or upgrade your account!) -
Diversified Woodcrafts ADA Instructor's Desk 1214K Elevations
Requires the Premium User plan or above. (Login or upgrade your account!) -
Diversified Woodcraft ADA Workstation 2956K
Requires the Premium User plan or above. (Login or upgrade your account!) -
Diversified Woodcraft ADA Workstation 2946K
Requires the Premium User plan or above. (Login or upgrade your account!) -
M301.4 Lift Compatibility
An overhead lift (and possibly a gurney-based transfer) may be used in lieu of the provisions for clearances in or around the base of equipment to accommodate the legs of portable floor...
-
1133A.4.1, Item 4
Finished flooring shall be extended to the wall beneath the sink and work surface. Exceptions: 1....
-
Golf Club Reach Range Area: ADA Standard Section 1007.3.2
All areas within holes where golf balls rest shall be within 36 inches (915 mm) maximum of a clear floor or ground space 36 inches (915 mm) wide minimum and 48 inches (1220 mm) long minimum...
-
5.8 Wheelchair Spaces Recommendations for M303 Diagnostic Equipment Used by Patients Seated in a Wheelchair
5.8 Wheelchair Spaces Recommendations for M303 Diagnostic Equipment Used by Patients Seated in a Wheelchair...
-
1193.23(a) (Advisory Guidance)
This section requires manufacturers to evaluate the accessibility, usability, and compatibility of telecommunications equipment and customer premises equipment and incorporate such evaluation...
-
Accessible Routes to Tiered Dining Areas in Sports Facilities
Accessible Routes to Tiered Dining Areas in Sports Facilities....
-
Cubicles and Counters: ADA Standard Section 231.4.1
Section 231.4.1 covers scoping requirements in the current ADA Standards for cubicles and counters.
-
231.4 Visiting Areas
231.4 Visiting Areas. Visiting areas shall comply with 231.4....
-
M301.2.3 Size (Section-by-Section Analysis)
The MDE NPRM proposed a transfer surface size for diagnostic equipment used in the supine, prone, or side-lying position of 30 inches wide and 15 inches deep minimum....
-
Performing Areas
Performing areas include spaces typically elevated or depressed and used primarily for purposes of entertainment, including stages, arena floors, and orchestra pits....
-
M301.2.2 Size
The size requirements in this section apply only to the portion of the diagnostic equipment used for transfer....
-
11B-246.4 Day use areas and vista points
Day use areas, vista points, and similar areas shall be accessible....
-
11B-246.4 Day use areas and vista points
Day use areas, vista points, and similar areas shall be accessible....
-
11B-246.4 Day use areas and vista points
Day use areas, vista points, and similar areas shall be accessible....
-
Telecommunications Act
Section 255 and Section 251(a)(2) of the Communications Act of 1934, as amended by the Telecommunications Act of 1996, require manufacturers of telecommunications equipment and providers...
