, compared to (ii) the total number of seats in the auditorium....
Search Results "Seat Width"
Filters
Commonly Searched Documents
-
6.9
-
6.1
6.1 Wheelchair spaces shall have at least one fixed companion fixed seat adjacent to each wheelchair space....
-
502.3.1 Width
Access aisles serving car and van parking spaces shall be 60 inches (1525 mm) wide minimum.
-
502.3.1 Width
Access aisles serving car and van parking spaces shall be 60 inches (1525 mm) wide minimum.
-
502.3.1 Width
Access aisles serving car and van parking spaces shall be 60 inches (1525 mm) wide minimum.
-
5.3.3.3 Location Where Walls Not Provided
Where walls or partitions are not provided, the seat shall be positioned in a corner of the clear floor or ground space required by 5.3.2 for a left-hand or right-hand approach....
-
11B-404.2.3 Clear width
Door openings shall provide a clear width of 32 inches (813 mm) minimum....
-
Standard Roll-In Type Shower Compartments: ADA Standard Section 608.5.2
Section 608.5.2 covers the current ADA Standards for controls in standard roll-in type shower compartments.
-
11B-608.5.2 Standard roll-in type shower compartments
) minimum and 27 inches (686 mm) maximum from the seat wall; and shall be located above the grab bar, but no higher than 48 inches (1219 mm) above the shower floor...
-
§ 38.95(d) Mobility aid seating location
(d) Mobility aid seating location. Spaces for persons who wish to remain in their wheelchairs or mobility aids shall have a minimum clear floor space 48 inches by 30 inches....
-
404.2.3 Doorways - Clear Width
Door openings shall provide a clear width of 32 inches (815 mm) minimum....
-
11B-404.2.3 Clear width
Door openings shall provide a clear width of 32 inches (813 mm) minimum....
-
11B-404.2.3 Clear width
Door openings shall provide a clear width of 32 inches (813 mm) minimum....
-
11B-233.3.1.2.6.5 Additional requirements.
Interior door opening width complying with Section 11B-404.3.1. 3. Door and gate hardware complying with Section 11B-404.2.7. 4....
-
410.6 Doors and Gates
End doors and gates shall provide a clear width 32 inches (815 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1065 mm) minimum....
-
Section 36.308 Seating in Assembly Areas (Preamble, Section-by-Section Analysis)
Section 36.308 Seating in Assembly Areas....
-
T213.1 General
Seats on non-rail vehicles shall comply with T213....
-
5.2.2 Transfer Surface Size for Equipment Used by Patients in Seated Position
5.2.2 Transfer Surface Size for Equipment Used by Patients in Seated Position....
-
11B-410.6 Doors and gates
End doors and gates shall provide a clear width 32 inches (813 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
11B-410.6 Doors and gates
End doors and gates shall provide a clear width 32 inches (813 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
Width of Spaces [1012.3]
Parking spaces for vehicles other than RVs must be at least 16 feet wide. Parking spaces at least 16 feet wide can accommodate vans equipped with a lift or ramp. When two adjacent...
-
410.6 Doors and Gates
End doors and gates shall provide a clear width 32 inches (815 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1065 mm) minimum....
-
4.6.3* PARKING SPACES
Parked vehicle overhangs shall not reduce the clear width of an accessible circulation route....
-
Scoping [4.1.3(18)]
Scoping [4.1.3(18)] Access is required to at least 5% of fixed or built-in seating and tables....