OR, c. all ADA-mandated wheelchair seating and companion seating is located (i) within the rear 60% of the seats provided in an auditorium, or (ii) within the area in an auditorium in...
Search Results "Recessed Seat Cover Dispenser"
Commonly Searched Documents
-
6.9
-
Section 4. Application of the Guidelines
This section states that the design specifications that comprise the final Guidelines apply to all "covered multifamily dwellings" as defined in Section 2 of the Guidelines....
-
Sec.36.308 Seating in assembly areas
Sec.36.308 Seating in assembly areas....
-
221.8 Temporary Platforms or Other Movable Structures
Wheelchair spaces and companion seats shall not be located on (or obstructed by) temporary platforms or other movable structures, except that when an entire seating section is placed on...
- Bradley Mirror, Towel Dispenser Multi-Purpose Unit 155
- Halyard Cassette Skin Care Manual Dispenser 92144
-
Additional Design Specifications for Requirement 1
Finally, the Guidelines provide that if the slope of the finished grade between covered multifamily dwellings and a public or common use facility exceeds 8.33%, or where other physical barriers...
- AJW Architectural Products U103 33 oz. Single Cartridge ABS Liquid Soap Dispenser - Surface Mounted
-
Requests for Seat Assignments by a Passenger Accompanied by a Service Animal
Requests for Seat Assignments by a Passenger Accompanied by a Service Animal For a disabled passenger traveling with a service animal, you must provide, as the passenger with a disability...
- Better Living Clear Choice Soap and Shower Dispenser 2
- Pilot Rock PWS-D019 Pet Waste Roll Bag Dispenser Using Bags on a Card
- Bobrick Automatic Foam Dispenser B-8263
- Figure 610.3 Extent of Seat – Drawing from the U.S. Access Board
-
11B-607.2 Clearance
Where a permanent seat is provided at the head end of the bathtub, the clearance shall extend 12 inches (305 mm) minimum beyond the wall at the head end of the bathtub....
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
903.5 Height
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground....
-
903.5 Height
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground....
-
903.5 Height
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground. ...
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
4.2 Q. What if new public and common use spaces are also being added?
A. If new public and common use areas or buildings are also added, they are required to be accessible.
-
7.1 Q. Do the new construction requirements of the Fair Housing Act apply to continuing care facilities which incorporate housing, health care and other types of services?
A. The new construction requirements of the Fair Housing Act would apply to continuing care facilities if the facility includes at least one building with four or more dwelling...
-
6. Ramps
Accessible element or space ANSI A117.1 section APPLICATION 6. Ramps 4.8 Accessible routes with slopes greater than...
-
T-turn Maneuvering Space
Comment. Several commenters stated that this design specification was unclear in two respects. First, they stated that it was unclear when it is necessary for a designer to provide...