Search Results "Ceiling Mounted Patient Lift"
- Stanley Access Technologies Dura-Care 7000 Manual Door System 3.03 DC70TL-BP
-
Horton Automatics Profiler® Smoke-Rated Telescoping ICU/CCU Sliding Door Model
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Horton Automatics ICU/CCU Bi-Fold/Bi-Swing™ Door System
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Stanley Access Technologies Dura-Care 7000 Manual Door System 3.04 DC70TL-SS
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Stanley Access Technologies Dura-Care 7200 Manual Sliding Door
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Stanley Access Technologies Dura-Care Manual Sliding Door
Requires the Premium User plan or above. (Login or upgrade your account!)
-
§ 38.159(b)(12) Use by standees
Lifts shall accommodate persons using walkers, crutches, canes or braces or who otherwise have difficulty using steps....
-
11B-223.2.2 Facilities specializing in treating conditions that affect mobility
In facilities specializing in treating conditions that affect mobility, 100 percent of the patient bedrooms shall provide mobility features complying with Section 11B-805....
-
B. Effective Communication
MSHA will advise Patients and Companions who require Auxiliary Aids or Services that these are available throughout the Patient’s time at the MSHA hospital as requested by the Patient....
-
§ 38.95(b)(5) Platform barriers
The lift platform shall be equipped with barriers to prevent any of the wheels of a wheelchair or mobility aid from rolling off the lift during its operation....
-
5.4.5.1 Transfer and Positioning Support Position for Imaging Equipment
5.4.5.1 Transfer and Positioning Support Position for Imaging Equipment. The transfer or positioning support should be oriented horizontally on imaging equipment with transfer...
-
5.4.2.2 Transfer and Positioning Support Length for Imaging Equipment with Transfer Surfaces
5.4.2.2 Transfer and Positioning Support Length for Imaging Equipment with Transfer Surfaces. Transfer supports for imaging equipment should be 28 inches minimum in length and...
-
Operation
Operation Platform lifts must be independently usable....
-
5.3.1 Permitted Obstructions to Transfer Sides for M301 and M302
Obstructions shall not be vertically less than 1 inch nor be horizontally more than 3 inches from the edge of the patient support surface to provide unobstructed access to the transfer surface...
-
D. Notice to the Public
Within 60 days of the effective date of this Agreement, MSHA shall maintain signs of conspicuous size and print at all MSHA admitting stations, the emergency department, and wherever a Patient’s...
-
Performing Areas
Lifts can be used to provide access to these areas and, if located on the same level, other areas intended for use by performers but not the public, such as dressing and locker rooms....
-
12. What if I have two pools or a pool and a spa? Can I share a lift between pools?
Can I share a lift between pools? In new construction, each pool or spa must provide accessible entry and exit....
-
M305.2.1 Location
Transfer supports shall comply with M305.2.1.1 or M305.2.1.2 and shall be located 1 ½ inches (38 mm) maximum measured horizontally from the plane defined by the nearest edge of the...
-
M305.2.4 Cross Section
Transfer supports shall have a cross section complying with 305.2.4.1 or 305.2.4.2.
-
M305.2.3 Height
During use, the tops of transfer support gripping surfaces shall be 6 inches (150 mm) minimum and 19 inches (485 mm) maximum higher than the top of the associated uncompressed...
-
M305.2.6 Gripping Surface
Transfer support gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides. The bottoms of transfer support gripping surfaces...
-
M305.2.4 Cross Section (Section-by-Section Analysis)
The proposed rule did not provide specific requirements for the cross section of transfer supports. However, in the MDE NPRM preamble, the Access Board noted that it was considering...
-
5.4.1 Transfer Support Location for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
5.4.1 Transfer Support Location for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position. Transfer supports should be required on both sides of the transfer surface and...
-
5.4.5 Transfer Support Position Recommendation for M301 and M302
5.4.5 Transfer Support Position Recommendation for M301 and M302 Description: Transfer support position refers to the placement of the gripping surface within the minimum and...