Spaces and elements within employee work areas shall only be required to comply with Sections 11B-206.2.8, 11B-207.1, and 11B-215.3 and shall be designed and constructed so that individuals...
Search Results "Non-Circular Cross Section"
Filters
Commonly Searched Documents
-
11B-203.9 Employee work areas
-
11B-608.9 Shower floor or ground surface
Floor or ground surfaces of showers shall comply with Section 11B-302.1 and shall be sloped 1:48 maximum in any direction....
-
11B-608.1 General
Shower compartments shall comply with Section 11B-608. [2010 ADAS] Advisory 608.1 General....
-
1133A.2.1, Item 2
U-shaped kitchens, designed with a cooktop or sink located at the base of the U, which provides a knee and toe space in accordance with Section 1133A.7 to allow for a forward approach, shall...
-
11B-406.1 General
Curb ramps, blended transitions and islands on accessible routes shall comply with Section 11B-406....
-
1.1.6 Nonbuilding standards, orders and regulations
Requirements contained in the California Building Code, or in any other referenced standard, code or document, which are not building standards as defined in Health and Safety Code Section...
-
§ 38.113(e) Signage
The International Symbol of Accessibility shall be displayed on the exterior of all doors complying with this section unless all cars and doors are accessible and are not marked by the access...
-
11B-503.4 Floor and ground surfaces
Vehicle pull-up spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle pull-up space they serve....
-
11B-209.1 General
Passenger drop-off and loading zones shall be provided in accordance with Section 11B-209. [2010 ADA Standards] 209.1 General....
-
1.1.6 Nonbuilding standards, orders and regulations
Requirements contained in the California Building Code, or in any other referenced standard, code or document, which are not building standards as defined in Health and Safety Code Section...
-
Scoping
The minimum number of guest rooms required to be accessible in transient lodging facilities is covered by section 224 of the 2010 Standards....
-
Costs of Adaptation
Section 100.203 of the Fair Housing regulations provides that discrimination includes a refusal to permit, at the expense of a handicapped person, reasonable modifications of existing premises...
-
1.0 Background
Section 2.0 describes the methodology we used to make these comparisons. Section 3.0 includes a comparison of the research studies’ methodologies....
-
Relationship to Other Laws
Relationship to Other Laws Section 36.103 of the Department's regulation implementing title III of the ADA states that except as otherwise provided in part 36, that part shall not be...
-
Sidewalks and Walkways
Some sidewalks do not include curb ramps or, if they do, the ramped section is too narrow or steep....
-
11B-704.4.1 Height
Exception: Where seats are provided, TTYs shall not be required to comply with Section 11B-704.4.1. [2010 ADAS] Advisory 704.4.1 Height. ...
-
Valet Parking and Mechanical Access Parking Garages
The 1991 Standards, at sections 4.1.2(5)(a) and (e), and sections 208.2, 209.4, and 209.5 of the 2010 Standards require parking facilities that provide valet parking services to have an...
-
11B-216.14 Variable message signs
Where provided in transportation facilities, variable message signs conveying transportation-related information shall comply with Section 11B-703.8....
-
[F] 907.4.2.2 Height
Manual fire alarm boxes shall also comply with Section 11B-309.4....
-
214 and 611 Washing Machines and Clothes Dryers
214 and 611 Washing Machines and Clothes Dryers Sections 214.2 (washing machines) and 214.3 (clothes dryers) of the 2010 Standards specify the number of each type of these machines required...
-
11B-306.3.3 Minimum required depth
At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth of 8 inches (203 mm...
-
104 Conventions
Section 104.1 notes that all dimensions not stated as a "maximum" or "minimum" are absolute and that all dimensions are "subject to conventional industry tolerances."...
-
1117B.5.5, Item 2
SECTION 1117B - OTHER BUILDING COMPONENTS 1117B.5 Signs and identification. ...
-
EFFECTIVE DATE/TERMINATION DATE
WOLFE, Special Litigation Counsel ROBERTA KIRKENDALL, Special Legal Counsel Disability Rights Section Civil Rights Division /s/ Megan Schuller MEGAN E....