Transfer surfaces shall be adjustable in height measured from the floor to the top of the uncompressed transfer surface and shall provide the following: A....
Search Results "Shall"
-
M302.2.1 Adjustability
-
407.12.2.2 Obstructed Side Reach
Where the operable part is located more than 10 inches (255 mm), but not more than 24 inches (610 mm), beyond the vertical reference plane, the height of the operable part shall be 46 inches...
-
1018.5 Obstacles
Obstacles on beach access routes and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
403.5.2 Clear Width at Turn
Where the accessible route makes a 180 degree turn around an element which is less than 48 inches (1220 mm) wide, clear width shall be 42 inches (1065 mm) minimum approaching the turn, 48...
-
11B-807.2.4 Toilet and bathing facilities
Toilet facilities or bathing facilities that are provided as part of a cell shall comply with Section 11B-603....
-
11B-809.9.3 Removable base cabinets
Knee and toe space complying with Section 11B-306 shall be provided at sinks and work surfaces required to comply with Section 11B-809.9.4....
-
11B-219.3 Receivers
The minimum number of receivers to be provided shall be equal to 4 percent of the total number of seats, but in no case less than two....
-
11B-233.3.4.2 Alterations to individual residential dwelling units
facilities with individual residential dwelling units, where a bathroom or a kitchen is substantially altered, and at least one other room is altered, the requirements of Section 11B-233.3.1 shall...
-
11B-411.2.1.2.2 Touch screen
Touch screen display shall comply with Section 11B-411.2.1.2.4....
-
11B-411.2.1.2.4.3 Duration
Elevator assignment characters shall be displayed for a minimum of 5 seconds....
-
4.13.1 GENERAL
Doors required to be accessible by 4.1 shall comply with the requirements of 4.13....
-
603.2.1 Turning Space
Turning space complying with 304 shall be provided within the room....
-
4.11.1 LOCATION
Platform lifts permitted by 4.1 shall comply with the requirements of 4.11....
-
F247.4.3 Viewing Areas
Viewing areas provided on trails shall comply with F246.2 and F246.3....
-
11B-411.4.3 Platform to hoistway clearance
Platform to hoistway clearance shall comply with Section 11B-407.4.3....
-
11B-411.4.8.2.3 Frequency
The verbal annunciator frequency shall comply with Section 11B-407.4.8.2.3....
-
1009.2.5 Seat Width
The seat shall be 16 inches (405 mm) wide minimum....
-
4.29.1 GENERAL
Tactile warnings required to be accessible by 4.1 shall comply with 4.29....
-
11B-504.6 Handrails
Stairs shall have handrails complying with Section 11B-505....
-
T304.1 General
Operable parts in non-rail vehicles shall comply with T304....
-
T303.3 Cross Section
Gripping surfaces shall have a cross section complying with T303.3....
-
§ 37.185 Fleet accessibility requirement for OTRB fixed-route systems of large operators
Each large operator subject to the requirements of §37.183 shall ensure that--...
-
11B-407.2.3 Hoistway signs
Signs at elevator hoistways shall comply with Section 11B-407.2.3....
-
F213.3.5 Mirrors
Where mirrors are provided, at least one shall comply with 603.3....