For L-shaped or U-shaped grab bars complying with Section 11B-609.9 (Alternate Configuration) the space between the walls and the grab bar shall be 1½ inches (38 mm) minimum for a distance...
Search Results "Comply With"
-
11B-609.3 Spacing
-
4.3 Locker Room Barriers and Solutions
Restrooms are not large enough for a wheelchair user to maneuver Change hinges so door swings out, to provide more space Rearrange the restroom partitions to comply with ADAAG requirements...
-
The Purpose of FSORAG and FSTAG
FSORAG and FSTAG have sections explaining when, where, and how much of the recreation area or trail is included (scoping); what has to comply with the guidelines; definitions of terms; and...
-
Step 1: Determine the Applicability of FSTAG
Does the proposed trail connect to a trailhead or to a trail that substantially complies with FSTAG? (Trailhead is defined in "Understanding Trail Terminology.")...
-
After Completing the Survey
Alterations When State and local governments make permanent modifications or alterations to facilities that serve as polling places these alterations must comply with the ADA Standards...
-
D. INDEPENDENT LICENSED ARCHITECT
The ILA must act independently to certify whether any alterations, additions, or modifications made by the County during the term of this Consent Decree comply with the applicable standard...
-
F. SELF-EVALUATION
to providing individuals with disabilities with full access to its programs and services and (ii) the steps, in addition to those set forth in paragraphs 5 to 23, that are necessary to comply...
-
EMPLOYMENT
Within three months of the effective date of this Agreement, the City will amend its employment policies, as necessary, to comply with the regulations of the U.S....
-
APPENDIX A GENERAL POLICY OF NONDISCRIMINATION ON THE BASIS OF DISABILITY
Failure to comply with this policy may result in disciplinary action....
-
Ensuring Online Files and Documents are Accessible
The tool will help you create documents that are accessible for everyone and that comply with WAI's WCAG 2.0 criteria (the current version of the criteria)....
-
Features of Accessible Parking Spaces
Parking space identification sign with the international symbol of accessibility complying with 703.7.2.1 mounted 60 inches minimum above the ground surface measured to the bottom of the...
-
F244.2 Camping Units with Mobility Features
Camping facilities shall provide camping units with mobility features complying with F244.2 in accordance with Table F244.2....
-
Section 4.1.1, Application (Section-By-Section Analysis and Response to Comments)
provides that all areas of newly designed or newly constructed buildings and facilities and altered portions of existing buildings and facilities required to be accessible by Sec.4.1.6 must comply...
-
Section 1194.5 Equivalent facilitation (Preamble, Section-by-Section Analysis)
Commenters supported the Board in its recognition that accessibility may sometimes be attained through products that do not strictly comply with design standards....
-
11B-106.5 Defined terms
ANSI Approved Building Building Official CCR Clear Comply...
-
Section 35.137 Mobility devices. (Section-by-Section Analysis)
If a facility complies with the applicable design requirements in the 1991 Standards or the 2010 Standards, the public entity will not be required to exceed those standards to accommodate...
-
11B-406.5.3 Landings
Exception: Parallel curb ramps shall not be required to comply with Section 11B-406.5.3. Advisory 11B-406.5.3 Landings....
-
11B-609.3 Spacing
For L-shaped or U-shaped grab bars complying with Section 11B-609.9 (Alternate Configuration) the space between the walls and the grab bar shall be 1½ inches (38 mm) minimum for a distance...
-
11B-1002.6 Transfer devices for use with amusement rides
Transfer devices for use with amusement rides shall comply with Section 11B-1002.6 when positioned for loading and unloading....
-
11B-703.3.1 Dimensions and capitalization
Braille dots shall have a domed or rounded shape and shall comply with Table 11B-703.3.1....
-
11B-1002.6 Transfer devices for use with amusement rides
Transfer devices for use with amusement rides shall comply with Section 11B-1002.6 when positioned for loading and unloading....
-
404.2.4.1 Swinging Doors and Gates
Swinging doors and gates shall have maneuvering clearances complying with Table 404.2.4.1....
-
11B-609.3 Spacing
For L-shaped or U-shaped grab bars complying with Section 11B-609.9 the space between the walls and the grab bar shall be 1½ inches (38 mm) minimum for a distance of 6 inches on either side...
-
11B-703.3.1 Dimensions and capitalization
Braille dots shall have a domed or rounded shape and shall comply with Table 11B-703.3.1....